Investigation on asphalt binder strength at low temperatures
- 24 October 2012
- journal article
- research article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 13 (4) , 804-816
Abstract
A new strength test method for asphalt binders at low temperatures is investigated in this paper. A modified Bending Beam Rheometer (BBR), capable of applying loads at different rates, is used to obtain asphalt binder flexural strength. Strength values obtained from the BBR test are compared with strength values obtained from the Direct Tension Tester (DTT) test and significant differences are found between the two tests. Additional BBR strength tests are run on asphalt binder beams after replacing the ethanol used in the cooling bath with potassium acetate, similar to DTT testing conditions, and flexural strengths significantly larger than those obtained with ethanol are obtained. Weakest link theory is used to convert three-point bending strength to direct tension strength and to perform volume correction of DTT values. Based on the corrected values, the BBR and DTT strength measurements are similar, when the same cooling medium is used. The effect of the cooling medium on BBR creep stiffness is also evaluated. From the limited experimental tests, it appears that there are no significant differences in stiffness and m-value after 1 h of isothermal storage.Keywords
This publication has 14 references indexed in Scilit:
- Unified nano-mechanics based probabilistic theory of quasibrittle and brittle structures: I. Strength, static crack growth, lifetime and scalingJournal of the Mechanics and Physics of Solids, 2011
- Scaling of strength and lifetime probability distributions of quasibrittle structures based on atomistic fracture mechanicsProceedings of the National Academy of Sciences, 2009
- Activation energy based extreme value statistics and size effect in brittle and quasibrittle fractureJournal of the Mechanics and Physics of Solids, 2007
- A fracture mechanics approach to environmental stress cracking in poly(ethyleneterephthalate)Polymer, 1998
- The influence of liquid uptake on environmental stress cracking of glassy polymersMaterials Science and Engineering: A, 1995
- Environmental stress cracking of glassy polymers and solubility parametersJournal of Materials Science, 1986
- Kinetics of environmental stress cracking in high density polyethylenePolymer, 1981
- Environmental crazing in a glassy polymer: the role of solvent absorptionJournal of Materials Science, 1973
- A review of crazing and fracture in thermoplasticsJournal of Polymer Science: Macromolecular Reviews, 1973
- Hypothetical mechanism of crazing in glassy plasticsJournal of Materials Science, 1970