Particleboards produced with different proportions of Hevea brasiliensis: Residual wood valorization in higher value added products
Authors:
- Douglas Lamounier FariaDFDouglas Lamounier Faria
- Tony Matheus Carvalho EugênioTETony Matheus Carvalho Eugênio
- Daiane Erika LopesDLDaiane Erika Lopes
- Thiago de Paula ProtásioTPThiago de Paula Protásio
- Lourival Marin MendesLMLourival Marin Mendes
- José Benedito Guimarães JuniorJJJosé Benedito Guimarães Junior
Open Access
- 1 January 2021
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Ciência E Agrotecnologia
- Vol. 45
Abstract
The use of the Hevea brasiliensis tree in latex rubber production has resulted in a consolidated role of this tree in the Brazilian economy. However, at the end of the productive cycle of the tree that lasts for approximately 25 years, the timber resulting from this venture has no added value and is usually used for the production of firewood. In order to introduce this species into the furniture and civil construction industry, the current study aimed to evaluate the quality of particleboard produced by adding Pinus oocarpa wood with Hevea brasiliensis wood in different ratios. The particleboards were produced with a nominal density of 0.60 g/cm³ and 8% (wt%) urea-formaldehyde resin and pressed at 160 °C for 8 min at a pressure of 4.0 MPa. The quality of the particleboard was evaluated by water absorption and thickness swelling, internal bonding, static bending, and screw withdrawal tests. The substitution of Pinus particles by Hevea wood resulted in decreased water absorption and thickness swelling. The boards produced with a higher proportion of Hevea had better dimensional stability due to the greater porosity of the Pinus oocarpa particles. The inclusion of Hevea brasiliensis wood resulted in a 75% increase in the modulus of rupture and a 300% increase in internal bonding compared with the particleboards produced only with Pinus oocarpa wood. The results show that Hevea brasiliensis wood could be used to obtain higher value-added products and contribute to the diversification of the raw materials used in the particleboard industries of Brazil.Keywords
This publication has 22 references indexed in Scilit:
- Functionally Graded MDP Panels Using Bamboo ParticlesKey Engineering Materials, 2015
- Potential of rubberwood (Hevea brasiliensis) for structural use after the period of latex extraction: a case study in BrazilJournal of Wood Science, 2015
- Conversion of technical lignins to functional materials with retained polymeric propertiesJournal of Wood Science, 2015
- MDP Panels Manufactured with Hevea Brasiliensis Overlaid with Bamboo Foil of Phyllostachys EdulisAdvanced Materials Research, 2015
- Variability in chemical and mechanical properties of Pará rubber (Hevea brasiliensis) treesScienceAsia, 2015
- A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and ligninRenewable and Sustainable Energy Reviews, 2014
- Multilayer Medium Density Particleboard Using Castor Oil-Based Polyurethane Resin and Hevea Brasiliensis WoodAdvanced Materials Research, 2014
- Sisvar: a Guide for its Bootstrap procedures in multiple comparisonsCiência E Agrotecnologia, 2014
- Use of maize cob for production of particleboardCiência E Agrotecnologia, 2013
- Investigation of Factors Affecting the Production and Properties of Maize Cob-ParticleboardsWaste and Biomass Valorization, 2013