Design, fabrication, and high-gradient testing of an -band, traveling-wave accelerating structure milled from copper halves
Authors:
Open Access
- 7 June 2018
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 21 (6) , 061001
Abstract
A prototype 11.994 GHz, traveling-wave accelerating structure for the Compact Linear Collider has been built, using the novel technique of assembling the structure from milled halves. The use of milled halves has many advantages when compared to a structure made from individual disks. These include the potential for a reduction in cost, because there are fewer parts, as well as a greater freedom in choice of joining technology because there are no rf currents across the halves’ joint. Here we present the rf design and fabrication of the prototype structure, followed by the results of the high-power test and post-test surface analysis. During high-power testing the structure reached an unloaded gradient of at a rf breakdown rate of less than with a 200 ns pulse. This structure has been designed for the CLIC testing program but construction from halves can be advantageous in a wide variety of applications.
Keywords
This publication has 3 references indexed in Scilit:
- Experimental study of rf pulsed heatingPhysical Review Special Topics - Accelerators and Beams, 2011
- New local field quantity describing the high gradient limit of accelerating structuresPhysical Review Special Topics - Accelerators and Beams, 2009
- A Nonresonant Perturbation TheoryIEEE Transactions on Microwave Theory and Techniques, 1966