Modeling Compressive Skin Failure of Sandwich Composites in Fire
Authors:
- 1 May 2008
- journal article
- research article
- Published by SAGE Publications in Journal of Sandwich Structures & Materials
- Vol. 10 (3) , 217-245
Abstract
A thermal-mechanical model is presented for calculating the residual compressive strength of flammable sandwich composite materials in fire. The model can also estimate the time-to-failure of the laminate face skin to sandwich composites exposed to fire. The model involves a two-stage analysis: thermal modeling and mechanical modeling. The thermal component of the model predicts the temperature profile and amount of decomposition through sandwich composites exposed to one-sided heating by fire. The mechanical component of the model estimates the residual compressive strength of the sandwich composite and the onset of skin failure. The model is tested for sandwich composite materials with combustible glass/ vinyl ester skins and balsa core. Experimental fire tests are performed on the sandwich composites under combined compressive loading and one-sided heating at constant heat flux levels between 10 kW/m 2 (Tmax · 250°C) and 50 kW/m2 (·600°C). The model predicts that the time-to-failure increases with the skin thickness and decreases with an increase to the applied compressive stress or heat flux. The predictions are supported by experimental data from fire-under-load tests. It is envisaged that the model can be used to design sandwich composite materials with improved compressive load capacity in fire.Keywords
This publication has 19 references indexed in Scilit:
- Constituent based analysis of composite materials subjected to fire conditionsComposites Part A: Applied Science and Manufacturing, 2006
- Thermal buckling of a heat-exposed, axially restrained composite columnComposites Part A: Applied Science and Manufacturing, 2006
- Composite life under sustained compression and one sided simulated fire exposure: Characterization and predictionComposites Part A: Applied Science and Manufacturing, 2006
- Properties of composite materials for thermal analysis involving firesComposites Part A: Applied Science and Manufacturing, 2006
- Laminate Theory Analysis of Composites under Load in FireJournal of Composite Materials, 2006
- Thermally induced bending and wrinkling in large aspect ratio sandwich panelsComposites Part A: Applied Science and Manufacturing, 2005
- The Integrity of Polymer Composites during and after FireJournal of Composite Materials, 2004
- Compression properties of fire-damaged polymer sandwich compositesComposites Part A: Applied Science and Manufacturing, 2002
- A study on failure prediction and design criteria for fiber composites under fire degradationComposites Part A: Applied Science and Manufacturing, 1999
- High Temperature Thermomechanical Behavior of Carbon-Phenolic and Carbon-Carbon Composites, I. AnalysisJournal of Composite Materials, 1992