Milliwatt-Level Electromagnetic Induction-Type MEMS Air Turbine Generator
Authors:
- Minami KanekoMKMinami Kaneko
- Ken SaitoKSKen Saito
- Fumio UchikobaFUFumio Uchikoba
Open Access
- 18 July 2018
- book chapter
- Published by IntechOpen
Abstract
In this chapter, an electromagnetic induction-type MEMS air turbine generator that combined with the MEMS technology and the multilayer ceramic technology is proposed. Three types of MEMS air turbine generators that included the different bearing systems, shape of the rotor and shape of the magnetic circuits are discussed to achieve the high output power. In the MEMS air turbine, the purpose is to achieve high-speed rotational motion. As a result of the comparison between the different structures, a rim-type rotor and a miniature ball bearing system showed the high rotational speed than a flat-type rotor and a fluid dynamic bearing system. The maximum rotational speed of the fabricated air turbine was 290,135 rpm. Moreover, it is important to introduce the magnetic flux to the magnetic circuit. By the multilayer ceramic technology, the three-dimensional coil in miniature monolithic structure was fabricated. The magnetic core that was designed to introduce the magnetic flux showed the low magnetic flux loss. The fabricated MEMS air turbine and the multilayer ceramic magnetic circuit were combined, and the miniature electromagnetic induction-type generator was achieved. The output power was 2.41 mVA, when the load resistance and the output voltage were 8 Ω and 139 mV, respectively.Keywords
This publication has 16 references indexed in Scilit:
- Development of Miniature Camera Module Integrated With Solid Tunable Lens Driven by MEMS-Thermal ActuatorJournal of Microelectromechanical Systems, 2016
- Design and simulation of microstage having PZT MEMS actuator for 3D movement2016
- Designing the 3D electrostatic microgeneratorJournal of Electrostatics, 2013
- Ultraminiaturized High-Speed Permanent-Magnet Generators for Milliwatt-Level Power GenerationJournal of Microelectromechanical Systems, 2008
- Fabrication, modelling and characterization of MEMS piezoelectric vibration harvestersSensors and Actuators A: Physical, 2008
- Micro-Robot for Endoscope Based on Wireless Power Transfer2007
- Energy harvesting vibration sources for microsystems applicationsMeasurement Science and Technology, 2006
- An Untethered, Electrostatic, Globally Controllable MEMS Micro-RobotJournal of Microelectromechanical Systems, 2006
- Axial-flux permanent magnet machines for micropower generationJournal of Microelectromechanical Systems, 2005
- Macro Power from Micro MachineryScience, 1997