An Integrated, Optofluidic System With Aligned Optical Waveguides, Microlenses, and Coupling Prisms for Fluorescence Sensing
- 2 July 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 29 (4) , 600-609
Abstract
An improved, laser-induced fluorescence-based micro-optical biosensor was designed and fabricated, with cyclic olefin copolymer (COC) optical waveguides, a poly(methyl methacrylate) (PMMA) fluidic substrate with an array of microlenses, and a COC coupling prism integrated with the waveguide substrate or cover plate. The double-sided hot embossed fluidic substrate had sampling zone microchannels on the bottom and microlenses on the top. Dissolved COC injected into polydimethylsiloxane (PDMS) lost molds embedded the waveguides in the PMMA cover plate and formed the integrated coupling prism. The embedded COC waveguide was flycut down to $50~\mu \text{m}$ . The cover plate and shallow, 1:20 aspect ratio, microchannels were thermal fusion bonded using a pressure-assisted boiling point control system, without sagging. The large COC prism coupled better to the waveguide. The highest intensity evanescent excitation of the waveguide was obtained near the critical angle. The maximum signal-to-noise ratio (SNR) was 119 and the lowest detection limit was 7.34 $\times 10^{\mathbf {-20}}$ mol at a SNR of 2 for a $100~\mu \text{m}$ wide by $50~\mu \text{m}$ deep waveguide. The microlenses highly focused the fluorescent radiation in the sampling zone. The microfabricated waveguide enables rapid, low-cost detection of fluorescent samples with high SNR, a low detection limit, and high sampling efficiency. [2020-0067]Keywords
Funding Information
- National Institutes of Health
- National Institute of Biomedical Imaging and Bioengineering (1R01-EB-010087-01A1)
- Biotechnology Resource Center (1-P41-EB020594-01)
This publication has 53 references indexed in Scilit:
- Fully Integrated Thermoplastic Genosensor for the Highly Sensitive Detection and Identification of Multi‐Drug‐Resistant TuberculosisAngewandte Chemie International Edition, 2012
- A vertically stacked, polymer, microfluidic point mutation analyzer: Rapid high accuracy detection of low-abundance K-ras mutationsAnalytical Biochemistry, 2011
- Integrated optical devices for lab‐on‐a‐chip biosensing applicationsLaser & Photonics Reviews, 2011
- Tailorable integrated optofluidic filters for biomolecular detectionLab on a Chip, 2011
- Polymer‐based dense fluidic networks for high throughput screening with ultrasensitive fluorescence detectionElectrophoresis, 2010
- Fabrication of a cyclic olefincopolymer planar waveguide embedded in a multi-channel poly(methyl methacrylate) fluidic chip for evanescence excitationLab on a Chip, 2009
- Polymer Microfluidic Chips with Integrated Waveguides for Reading MicroarraysAnalytical Chemistry, 2007
- A titer plate-based polymer microfluidic platform for high throughput nucleic acid purificationBiomedical Microdevices, 2007
- Large-scale hot embossingMicrosystem Technologies, 2005
- New aspects of simulation in hot embossingMicrosystem Technologies, 2004