Numerical investigation on different effects of recirculated species on UHC and CO formation during lean homogeneous combustion
Authors:
Open Access
- 29 March 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-14
Abstract
Although numerous studies have investigated the effect of EGR on engine combustion, no study has investigated the effect of each recirculated species separately on the engine emissions and combustion. This study investigated the effects of different components of the recirculated exhaust gas on the emission formation during lean homogeneous combustion. Due to lean combustion, O2, N2, CO2, and H2O are the main components of the exhaust gases. In addition, CO is also produced by the lean homogeneous combustion, which caused the chamber temperature to be low. The combustion chamber is simulated using a thermodynamic model and a quasi-developed chemical kinetic mechanism. The amount of added EGR is 0–40% by volume, and its various effects are investigated using the artificial inert species method. The basic results are validated against experimental data for different initial conditions. According to the results, N2 due to its higher mass fraction and H2O due to its higher heat capacity have the highest thermal effect. H2O has the maximum thermal effect, and N2 has the maximum dilution effect on thermal efficiency. The thermal effect of O2 differs from those of the other species. All three effects of EGR reduce UHC. However, there is no regular trend for CO. H2O and CO have increasing chemical effects, and O2 and other free radicals have reducing chemical effects on CO. H2O has the most thermal effect, O2 has the most chemical effect, and N2 has the most dilution effect on reducing UHC.Keywords
Funding Information
- Iran National Science Foundation (98018500)
This publication has 30 references indexed in Scilit:
- NOX reduction through various low temperature combustion technologies2022
- Emissions from homogeneous charge compression ignition (HCCI) engine using different fuels: a reviewEnvironmental Science and Pollution Research, 2021
- Thermodynamic modeling and validation of in‐cylinder flow in diesel enginesEnvironmental Progress & Sustainable Energy, 2019
- EGR control on operation of a tar tolerant HCCI engine with simulated syngas from biomassApplied Energy, 2018
- Various effects of reformer gas enrichment on natural-gas, iso-octane and normal-heptane HCCI combustion using artificial inert species methodEnergy Conversion and Management, 2018
- Effect of EGR at advanced injection timing on combustion characteristics of diesel engineAlexandria Engineering Journal, 2015
- Effect of different heat transfer models on HCCI engine simulationEnergy Conversion and Management, 2014
- Development of a new multi zone model for prediction of HCCI (homogenous charge compression ignition) engine combustion, performance and emission characteristicsEnergy, 2014
- Influences of pilot injection and exhaust gas recirculation (EGR) on combustion and emissions in a HCCI-DI combustion engineApplied Thermal Engineering, 2012
- The influence of Exhaust Gas Recirculation (EGR) on combustion and emissions of n-heptane/natural gas fueled Homogeneous Charge Compression Ignition (HCCI) enginesApplied Energy, 2011