Nanostructured Silicon‐Based Heterojunction Solar Cells with Double Hole‐Transporting Layers
- 3 December 2018
- journal article
- research article
- Published by Wiley in Advanced Electronic Materials
- Vol. 5 (2)
Abstract
Hybrid nanostructured silicon–organic solar cells have been pursued as a low‐cost solution for silicon photovoltaic devices. However, it is difficult for the organic semiconductor, typically poly(3,4‐ethylenedioxythiophene):polystyrene (PEDOT:PSS), to fully cover the nanostructured silicon surface due to the high surface tension of the polymer solution and the small size of the cavities in nanostructured silicon. As a result, the performance of the hybrid solar cells is limited by the defect‐induced surface recombination and poor hole extraction. In this work, an inorganic hole‐transporting layer, copper(I) thiocyanate (CuSCN), is introduced between silicon nanowire (SiNW) and PEDOT:PSS to improve the junction quality. The effect of CuSCN on as‐fabricated SiNW and tetramethylammonium hydroxide (TMAH)‐treated SiNW structures is examined, and it is shown that in both cases CuSCN can well cover the SiNW surface due to the easy penetration of its solution into the silicon nanostructure. As a result, the power conversion efficiency of the solar cells has been dramatically improved from 7.68% to 10.5% for as‐fabricated SiNW‐based‐hybrid cells, and from 10.75% to 12.24% for TMAH‐passivated SiNW‐based‐hybrid cells, suggesting that the double hole‐transporting layer approach can effectively improve the junction quality in hybrid organic‐nanostructured silicon‐based devices.Keywords
Funding Information
- Research Grants Council, University Grants Committee (CUHK417513, CUHK439013)
This publication has 32 references indexed in Scilit:
- Nanostructured Si/Organic Heterojunction Solar Cells with High Open‐Circuit Voltage via Improving Junction QualityAdvanced Functional Materials, 2016
- Unveiling the Hybrid n-Si/PEDOT:PSS InterfaceACS Applied Materials & Interfaces, 2016
- Low temperature fabrication of PEDOT:PSS/micro-textured silicon-based heterojunction solar cellsJournal of Materials Science, 2015
- Defect‐Minimized PEDOT:PSS/Planar‐Si Solar Cell with Very High EfficiencyAdvanced Functional Materials, 2014
- Interface investigation of planar hybrid n-Si/PEDOT:PSS solar cells with open circuit voltages up to 645 mV and efficiencies of 12.6 %Applied Physics A, 2014
- Application of scanning electron microscopy and X-ray microanalysis: FE-SEM, ESEM-EDS, and EDS mapping for studying the characteristics of topographical microstructure and elemental mapping of human cardiac calcified depositionAnalytical and Bioanalytical Chemistry, 2013
- Effects of phosphorus diffusion gettering on minority carrier lifetimes of single-crystalline, multi-crystalline and UMG silicon waferCurrent Applied Physics, 2013
- Heterojunction based hybrid silicon nanowire solar cell: surface termination, photoelectron and photoemission spectroscopy studyProgress in Photovoltaics: Research and Applications, 2013
- High‐Efficiency Si/Polymer Hybrid Solar Cells Based on Synergistic Surface Texturing of Si Nanowires on PyramidsSmall, 2012
- Investigation of aluminum-based nanocomposites with ultra-high strengthMaterials Science and Engineering: A, 2009