Hierarchical Co3O4@Ni-Co-O supercapacitor electrodes with ultrahigh specific capacitance per area
- 11 May 2012
- journal article
- research article
- Published by Tsinghua University Press in Nano Research
- Vol. 5 (5) , 369-378
Abstract
High specific capacitance per area is a critical requirement for a practical supercapacitor electrode, and needs a combination of high mass-loading of the electrochemically active material per area, and high utilization efficiency of this material. However, pursuing high mass-loading on conventional electrodes usually leads to an increase in “dead” material which is not accessible to the electrolyte in the supercapacitor, and thus prevents high utilization efficiencies of the material being realized. Here we show that this antagonism can be overcome by incorporating the electrochemically active material in a mesoporous hierarchical architecture. Fabrication of ternary ordered hierarchical Co3O4@Ni-Co-O nanosheet-nanorod arrays—involving the growth of densely aligned slim Ni-Co-O nanorods (diameter 3O4 microsheets which had been previously loaded on macroporous nickel foam—gives a material with excellent electrochemical performance as a supercapacitor electrode. At a current density of 5 mA/cm2, the electrodes have both high mass loading per area (12 mg/cm2) and high efficiency of 2098 F/g, giving specific capacitances per area as high as ∼25 F/cm2. When the current density was increased from 5 to 30 mA/cm2, 72% of the specific capacitance was retained and, furthermore, no significant decrease in capacitance was observed over 1000 charge/discharge cycles. The combination of these merits makes the composite material an excellent candidate for practical application as a supercapacitor electrode and, more generally, highlights the increased efficacies of materials which can result from fabricating mesoporous hierarchical structures at the nanoscale. Open image in new windowKeywords
This publication has 44 references indexed in Scilit:
- Carbon-Based Supercapacitors Produced by Activation of GrapheneScience, 2011
- Advanced asymmetrical supercapacitors based on graphene hybrid materialsNano Research, 2011
- Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodesNature Nanotechnology, 2011
- Ultrathin Planar Graphene SupercapacitorsNano Letters, 2011
- Nanoporous metal/oxide hybrid electrodes for electrochemical supercapacitorsNature Nanotechnology, 2011
- High-Power and High-Energy-Density Flexible Pseudocapacitor Electrodes Made from Porous CuO Nanobelts and Single-Walled Carbon NanotubesACS Nano, 2011
- Advanced Materials for Energy StorageAdvanced Materials, 2010
- Effect of Temperature on the Capacitance of Carbon Nanotube SupercapacitorsACS Nano, 2009
- Electrochemical Properties of High-Power Supercapacitors Using Single-Walled Carbon Nanotube ElectrodesAdvanced Functional Materials, 2001
- Carbon materials for the electrochemical storage of energy in capacitorsCarbon, 2001