An Inkjet-Printed PEDOT:PSS-Based Stretchable Conductor for Wearable Health Monitoring Device Applications
Authors:
- 29 April 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (18) , 21693-21702
Abstract
A stretchable conductor is one of the key components in soft electronics that allows the seamless integration of electronic devices and sensors on elastic substrates. Its unique advantages of mechanical flexibility and stretchability have enabled a variety of wearable bioelectronic devices that can conformably adapt to curved skin surfaces for long-term health monitoring applications. Here, we report a poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based stretchable polymer blend that can be patterned using an inkjet printing process while exhibiting low sheet resistance and accommodating large mechanical deformations. We have systematically studied the effect of various types of polar solvent additives that can help induce phase separation of PEDOT and PSS grains and change the conformation of a PEDOT chain, thereby improving the electrical property of the film by facilitating charge hopping along the percolating PEDOT network. The optimal ink formulation is achieved by adding 5 wt % ethylene glycol into a pristine PEDOT:PSS aqueous solution, which results in a sheet resistance of as low as 58 Ω/□. Elasticity can also be achieved by blending the above solution with the soft polymer poly(ethylene oxide) (PEO). Thin films of PEDOT:PSS/PEO polymer blends patterned by inkjet printing exhibits a low sheet resistance of 84 Ω/□ and can resist up to 50% tensile strain with minimal changes in electrical performance. With its good conductivity and elasticity, we have further demonstrated the use of the polymer blend as stretchable interconnects and stretchable dry electrodes on a thin polydimethylsiloxane (PDMS) substrate for photoplethysmography (PPG) and electrocardiography (ECG) recording applications. This work shows the potential of using a printed stretchable conducting polymer in low-cost wearable sensor patches for smart health applications.Keywords
Funding Information
- Bill and Melinda Gates Foundation (INV-005417)
This publication has 61 references indexed in Scilit:
- Intrinsically stretchable transparent electrodes based on silver-nanowire–crosslinked-polyacrylate compositesNanotechnology, 2012
- Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable SubstratesChemistry of Materials, 2012
- Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent ElectrodesAdvanced Functional Materials, 2011
- Materials and Mechanics for Stretchable ElectronicsScience, 2010
- Mechanical Buckling: Mechanics, Metrology, and Stretchable ElectronicsAdvanced Functional Materials, 2009
- Buckled and Wavy Ribbons of GaAs for High‐Performance Electronics on Elastomeric SubstratesAdvanced Materials, 2006
- Effects of poly(ethylene glycol) on electrical conductivity of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) filmApplied Surface Science, 2005
- On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatmentPolymer, 2004
- The electrocardiogram in ST elevation acute myocardial infarction: correlation with coronary anatomy and prognosisPostgraduate Medical Journal, 2003
- Understanding tapping-mode atomic force microscopy data on the surface of soft block copolymersSurface Science, 2003