Numerical Simulation of Fracture Propagation during Temporary Plugging Staged Fracturing in Tight-Oil Horizontal Wells
Open Access
- 8 April 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (16) , 18542-18555
Abstract
Fracture propagation with temporary plugging hydraulic fracturing in tight-oil reservoirs is simulated in this study. The research considers dynamic fluid redistribution, with stress differences among multiple fractures. The fracture morphology during temporary plugging staged fracturing (TPSF) is investigated by using a user-defined perforation element combined with a pore-pressure finite-element model. The precision of the integrated model is verified by using the standard finite-element approach. Then, case studies are presented to investigate the influence of cluster spacing, horizontal stress difference coefficients (SDC), injection rates, and barrier tensile strengths. The simulation results show that central cluster fractures are hampered by side-cluster fractures, while TPSF can alleviate the effect and lead to a more uniform propagation of all fractures. Stress interference weakens as cluster spacing increases, and propagation patterns are minimally influenced once spacing reaches 40 m. Higher injection rates can improve the injection pressure, enlarging fracture width, and potentially increasing the risk of fracture penetration. Barrier tensile strength and horizontal SDC can modify fracture geometries and determine the penetration behavior of multiple fractures.Keywords
Funding Information
- Natural Science Foundation of Sichuan Province (2023NSFSC0043, 24NSFSC1293)
- National Natural Science Foundation of China (42302317, 52278513)
- Doctoral Science Foundation of Xichang University (YBZ202233)
This publication has 41 references indexed in Scilit:
- Simulation of the interactions between multiple hydraulic fractures and natural fracture network based on Discrete Element Method numerical modelingEnergy Science & Engineering, 2020
- Numerical simulation of temporarily plugging staged fracturing (TPSF) based on cohesive zone methodComputers and Geotechnics, 2020
- XFEM-based cohesive zone approach for modeling near-wellbore hydraulic fracture complexityActa Geotechnica, 2018
- Hydraulic fracturing simulation for heterogeneous granite by discrete element methodComputers and Geotechnics, 2018
- Modeling hydraulic fracture propagation using cohesive zone model equipped with frictional contact capabilityComputers and Geotechnics, 2017
- Parameters controlling pressure and fracture behaviors in field injectivity tests: A numerical investigation using coupled flow and geomechanics modelComputers and Geotechnics, 2017
- FDEM-flow3D: A 3D hydro-mechanical coupled model considering the pore seepage of rock matrix for simulating three-dimensional hydraulic fracturingComputers and Geotechnics, 2017
- XFEM-Based CZM for the Simulation of 3D Multiple-Cluster Hydraulic Fracturing in Quasi-Brittle Shale FormationsRock Mechanics and Rock Engineering, 2016
- Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone modelEngineering Fracture Mechanics, 2012
- Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatusComposites Science and Technology, 1996