Seismic out‐of‐plane behavior of unreinforced masonry walls
Authors:
Abstract
Unreinforced masonry (URM) is one of the most used construction types in the world. In addition to the design for static loads, URM walls must also be designed for earthquake scenarios. In this load case, the out‐of‐plane loads (transverse to the plane) often have a significant impact on the load‐bearing capacity. In most practical applications, simplified methods are used to determine the out‐of‐plane capacity of URM walls. The estimations of these simplified models are often inaccurate since essential parameters are neglected. To determine out‐of‐plane capacity realistically, parameters such as vertical stiffness of the support, geometry, constraints, vertical loads, and dynamic effects must be taken into account. At the University of Kaiserslautern, shaking‐table tests with different conditions of upper support are performed. Real earthquake time histories are applied and increased until collapse of the wall. For numerical analyses of the deformation response of the wall, nonlinear single‐degree‐of‐freedom systems are developed and calibrated. In addition, results from simplified analysis models are compared with experimentally determined maximum acceptable earthquake accelerations. The comparison shows that the out‐of‐plane capacity is much higher than predicted by simplified models. The experimental, analytical, and numerical investigations on URM walls will be used to develop a simple and practical applicable engineering model in the next phase of the project.Keywords
This publication has 12 references indexed in Scilit:
- Investigation of the seismic out‐of‐plane behaviour of unreinforced masonry wallsMauerwerk, 2017
- Analysis of the out-of-plane capacity of unreinforced masonry infill wallsProcedia Engineering, 2017
- Out‐of‐Plane Dynamic Stability of Unreinforced Masonry Walls in One‐Way Bending: Shake Table TestingEarthquake Spectra, 2016
- Influence of boundary conditions on the out‐of‐plane response of brick masonry walls in buildings with RC slabsEarthquake Engineering & Structural Dynamics, 2016
- Eurocode 6: Bemessung und Konstruktion von Mauerwerksbauten — Teil 1‐1: Allgemeine Regeln für Bewehrtes und Unbewehrtes Mauerwerk: 2013‐022013
- Schubtragfähigkeit von Mauerwerk aus Porenbeton‐Plansteinen und ‐PlanelementenMauerwerk, 2010
- Experimental Investigation of Unreinforced Brick Masonry Walls in FlexureJournal of Structural Engineering, 2004
- Arching in Masonry Walls Subjected to Earthquake MotionsJournal of Structural Engineering, 2002
- Displacement‐based seismic analysis for out‐of‐plane bending of unreinforced masonry wallsEarthquake Engineering & Structural Dynamics, 2002
- Out-of-plane resistance of concrete masonry infilled panelsCanadian Journal of Civil Engineering, 1989