Microfluidic pumping, routing and metering by contactless metal-based electro-osmosis
Authors:
- 1 June 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 15 (17) , 3600-3608
Abstract
Over the past decade, many microfluidic platforms for fluid processing have been developed in order to perform on-chip fluidic manipulations. Many of these methods, however, require expensive and bulky external supporting equipment, which are not typically applicable for microsystems requiring portability. We have developed a new type of portable contactless metal electro-osmotic micropump capable of on-chip fluid pumping, routing and metering. The pump operates using two pairs of gallium metal electrodes, which are activated using an external voltage source, and separated from a main flow channel by a thin micron-scale PDMS membrane. The thin contactless membrane allows for field penetration and electro-osmotic (EO) flow within the microchannel, but eliminates electrode damage and sample contamination commonly associated with traditional DC electro-osmotic pumps that utilize electrodes in direct contact with the working fluid. The maximum flow rates and pressures generated by the pump using DI water as a working buffer are 10 nL min−1 and 30 Pa, respectively. With our current design, the maximum operational conductivity where fluid flow is observed is 0.1 mS cm−1. Due to the small size and simple fabrication procedure, multiple micropump units can be integrated into a single microfluidic device for automated on-chip routing and sample metering applications. We experimentally demonstrated the ability to quantify micropump electro-osmotic flowrate and pressure as a function of applied voltage, and developed a mathematical model capable of predicting the performance of a contactless micropump for a given external load and internal hydrodynamic microchannel resistance. Finally, we showed that by activating specific pumps within a microchannel network, our micropumps are capable of routing microchannel fluid flow and generating plugs of solute.Keywords
Funding Information
- Division of Chemical, Bioengineering, Environmental and Transport Systems (NSF CAREER AWARD/CBET-1351253)
This publication has 36 references indexed in Scilit:
- Surface Acoustic Wave MicrofluidicsAnnual Review of Fluid Mechanics, 2014
- Centrifugal microfluidics for biomedical applicationsLab on a Chip, 2010
- Rapid fluid flow and mixing induced in microchannels using surface acoustic wavesEurophysics Letters, 2009
- Crystallizing proteins on the basis of their precipitation diagram determined using a microfluidic formulatorJournal of Synchrotron Radiation, 2005
- Micro total analysis system ( -TAS) in biotechnologyApplied Microbiology and Biotechnology, 2004
- Microfluidic Large-Scale IntegrationScience, 2002
- Multi-level microfluidic channel routing with protected convex cornersSensors and Actuators A: Physical, 2002
- Electroosmotic Pumping and Valveless Control of Fluid Flow within a Manifold of Capillaries on a Glass ChipAnalytical Chemistry, 1994
- Piezoelectric micropump with three valves working peristalticallySensors and Actuators A: Physical, 1990
- Electrokinetic Flow in a Narrow Cylindrical CapillaryThe Journal of Physical Chemistry, 1965