A 2.5-T, 1.25-m Free Bore Superconducting Magnet for the Magnum-PSI Linear Plasma Generator
- 4 December 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (3) , 1-5
Abstract
DIFFER's main experiment Magnum-PSI is the only laboratory setup in the world capable of exposing materials to plasma conditions similar to those of future fusion reactors. The success of the Magnum-PSI experiment depends on the generation of a 2.5 T magnetic field without restricting the diagnostic access and operational aspects of the experiment. This has been achieved with a magnet consisting of five superconducting solenoids wound on a 2.5 m long stainless steel coil former positioned in a cryostat offering a 1.25 m warm bore. A copper stabilized multifilamentary NbTi conductor with a 3.48 mm$^2$ cross section has been used, thus the magnet exhibits a total inductance of 500 H and a stored energy of 16 MJ. This presents quite a challenge for the protection scheme that has been implemented using a mix of back-to-back cold diodes and external dump resistors. The coils generate a plateau shaped magnetic field adjustable up to 2.5 T while the distance between the coils allows for 16 room temperature view-ports. The coils are cooled with liquid helium using a re-condensing system operated with cryocoolers, while the magnet system cycles between zero and full field up to once per day.Keywords
This publication has 8 references indexed in Scilit:
- Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualificationNuclear Fusion, 2017
- Material testing facilities and programs for plasma-facing component testingNuclear Fusion, 2017
- Overview of the design approach and prioritization of R&D activities towards an EU DEMOFusion Engineering and Design, 2016
- Operational characteristics of the high flux plasma generator Magnum-PSIFusion Engineering and Design, 2014
- A full tungsten divertor for ITER: Physics issues and design statusJournal of Nuclear Materials, 2013
- Progress in the ITER Physics BasisNuclear Fusion, 2007
- Pre-Design of the Superconducting Magnet System for Magnum-psiIEEE Transactions on Applied Superconductivity, 2006
- A combined Thomson–Rayleigh scattering diagnostic using an intensified photodiode arrayReview of Scientific Instruments, 1992