Investigating the Mechanism of Shear Fatigue in Reinforced Concrete Beams subjected to Pulsating and Moving Loads using Digital Image Correlation
Authors:
Open Access
- 25 January 2019
- journal article
- research article
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 258, 03015
Abstract
An experimental investigation on three shear-critical reinforced concrete beams was performed to investigate the mechanism of shear fatigue. The first beam was simply tested to failure under monotonic loading to determine the static capacity, whereas the other two were subjected to repetitive loading below its static capacity to failure. Of these two beams, one was subjected to a stationary pulsating load at midspan while the other was subjected to a step-wise moving load along the span. During each experiment, the crack pattern was monitored throughout using an automated crack mapping employing the digital image correlation technique. The results show that each beam exhibited a unique crack pattern which could be characterised as shear-flexure in nature. It is shown the nature of crack propagation under monotonic loading is dissimilar to that under repetitive loading, especially when the load is not stationary. Moving load is also shown to cause greater damage to the beam than the stationary pulsating load and result in a reduction in fatigue life by almost two orders of magnitude.Keywords
This publication has 14 references indexed in Scilit:
- Visualization of Shear Cracks in a Reinforced Concrete Beam using the Digital Image CorrelationInternational Journal on Advanced Science, Engineering and Information Technology, 2018
- An investigation of the deterioration characteristics of concrete bridge decks with asphalt concrete in KoreaKSCE Journal of Civil Engineering, 2017
- Multiscale Coupled-Hygromechanistic Approach to the Life-Cycle Performance Assessment of Structural ConcreteJournal of Materials in Civil Engineering, 2015
- Study of railway track stiffness modification by polyurethane reinforcement of the ballastTransportation Geotechnics, 2014
- A Computational Simulation for the Damage Mechanism of Steel-Concrete Composite Slabs under High Cycle Fatigue LoadsJournal of Advanced Concrete Technology, 2011
- Shear Fatigue Response of Cracked Concrete InterfaceJournal of Advanced Concrete Technology, 2008
- Shear Fatigue Simulation of RC Beams Subjected to Fixed Pulsating and Moving LoadsJournal of Advanced Concrete Technology, 2008
- Three-Dimensional Fatigue Simulation of RC Slabs under Traveling Wheel-Type LoadsJournal of Advanced Concrete Technology, 2006
- Direct Path-Integral Scheme for Fatigue Simulation of Reinforced Concrete in ShearJournal of Advanced Concrete Technology, 2006
- RC Bridge Decks Under Pulsating and Moving LoadJournal of Structural Engineering, 1988