A Three-Dimensional Coupled Internal/External Simulation of a Film-Cooled Turbine Vane
Authors:
Open Access
- 7 June 1999
- conference paper
- Published by ASME International
Abstract
A three-dimensional Navier-Stokes simulation has been performed for a realistic film-cooled turbine vane using the LeRC-HT code. The simulation includes the flow regions inside the coolant plena and film cooling holes in addition to the external flow. The vane is the subject of an upcoming NASA Lewis Research Center experiment and has both circular cross-section and shaped film cooling holes. This complex geometry is modeled using a multi-block grid which accurately discretizes the actual vane geometry including shaped holes. The simulation matches operating conditions for the planned experiment and assumes periodicity in the spanwise direction on the scale of one pitch of the film cooling hole pattern. Two computations were performed for different isothermal wall temperatures, allowing independent determination of heat transfer coefficients and film effectiveness values. The results indicate separate localized regions of high heat flux in the showerhead region due to low film effectiveness and high heat transfer coefficient values, while the shaped holes provide a reduction in heat flux through both parameters. Hole exit data indicate rather simple skewed profiles for the round holes, but complex profiles for the shaped holes with mass fluxes skewed strongly toward their leading edges.Keywords
This publication has 12 references indexed in Scilit:
- Adiabatic Wall Effectiveness Measurements of Film-Cooling Holes With Expanded ExitsJournal of Turbomachinery, 1998
- Flowfield Measurements for Film-Cooling Holes With Expanded ExitsJournal of Turbomachinery, 1998
- A Detailed Analysis of Film–Cooling Physics: Part I — Streamwise Injection With Cylindrical Holes1997
- Effect of Squealer Tip on Rotor Heat Transfer and Efficiency1997
- Effect of Velocity and Temperature Distribution at the Hole Exit on Film Cooling of Turbine BladesJournal of Turbomachinery, 1997
- A Detailed Analysis of Film Cooling Physics: Part II—Compound-Angle Injection With Cylindrical HolesJournal of Turbomachinery, 1997
- Discrete-Jet Film Cooling: A Comparison of Computational Results With ExperimentsJournal of Turbomachinery, 1994
- Simulation of Transition with a Two-Equation Turbulence ModelAIAA Journal, 1994
- A Navier-Stokes analysis of film cooling in a turbine blade1993
- Multigrid calculation of three-dimensional viscous cascade flows1991