Promoting Cross-Link Reaction of Polymers by the Matrix–Filler Interface Effect: Role of Coupling Agents and Intermediate Linkers
- 24 May 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 128 (22) , 5534-5541
Abstract
The matrix-filler interface effect plays an important role in determining the structural stability and mechanical properties of polymer composite materials, which remain ambiguous and need to be studied. The network-forming dynamics of poly(3,3-bis (azidomethyl) oxetane-tetrahydrofuran) (PBT) at the ammonium perchlorate (AP) surface was studied by using atomistic molecular dynamics simulation, considering the additives of curing agent toluene diisocyanate (TDI), cross-linker trimethylolpropane (TMP), and coupling agent triethanolamine (TEA). The presence of the AP surface promotes chain cross-link reaction, which is attributed to the increased production of intermediate linkers formed by TDI, TMP, and TEA. The intermediate linker has three reactive sites that can react with PBT main chains to form a cross-linked structure. Owing to the strong interaction with the AP surface, the coupling agent TEA plays a dominant role in forming the intermediate linker. At the early stage of network forming (reaction ratio r < 30%), the AP surface adsorbs TEA, which leads to a maximum contact density to PBT. As r increases to 60%, the density of intermediate linkers near the AP surface reaches a maximum value. Consequently, the chain cross-link reactions between the intermediate linker and PBT main chains are enhanced as r > 60%. This work explains the micromechanism of the promotion of chain cross-link reaction by the interface effect and provides important insights on designing polymer materials with high mechanical properties.Keywords
This publication has 51 references indexed in Scilit:
- Research Advances in Bonding Agents for Composite PropellantsPropellants, Explosives, Pyrotechnics, 2020
- COMPASS II: extended coverage for polymer and drug-like molecule databasesJournal of Molecular Modeling, 2016
- Multiwfn: A multifunctional wavefunction analyzerJournal of Computational Chemistry, 2011
- Two advanced styrene‐butadiene/polybutadiene rubber blends filled with a silanized silica nanofiller for potential use in passenger car tire tread compoundJournal of Applied Polymer Science, 2011
- Mechanical behavior of highly filled natural CaCO3 composites: Effect of particle size distribution and interface interactionsPolymer Composites, 2008
- Effect of particle size of an amorphous calcium phosphate filler on the mechanical strength and ion release of polymeric compositesJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2006
- Optimization of PE/binder/PA extrusion blow‐molded films. II. Adhesion properties improvement using binder/EVA blendsJournal of Applied Polymer Science, 2006
- Water absorption in epoxy resins: The effects of the crosslinking agent and curing temperatureJournal of Applied Polymer Science, 2005
- Influence of interface interaction on the ultimate tensile properties of polymer compositesComposites, 1990
- Principles of interfacial coupling in fibre-reinforced plasticsInternational Journal of Adhesion and Adhesives, 1981