Effect of calcination temperature on the structural and electrical properties of low temperature sintered the (Na0.52K0.44Li0.04)(Nb0.88Sb0.08Ta0.04)O3 textured ceramics
Authors:
- 25 January 2023
- journal article
- research article
- Published by Taylor & Francis in Ferroelectrics
- Vol. 603 (1) , 308-315
Abstract
The 1.5 mol% Na2O excess (Na0.52K0.44Li0.04)(Nb0.88Sb0.08Ta0.04)O3 (NKN-LST) matrix powders were calcined at 500–950 °C. A perovskite structure of calcined powders without crystallinity obtains calcined at 550 °C. As the calcination temperature increases to 750 °C, NKN-LST powders have a single orthogonal structure. When the calcination temperature ≥800 °C, NKN-LST powders form tetragonal structure. In the calcination temperature range of 800–900 °C, it can be seen that there exists a two-phase coexistence of orthogonal and tetragonal structure in NKN-LST powders. Highly textured (001)-NKN-LST were prepared by the templated grain growth (TGG) using a two-step thermal process with Na2O as a low temperature sintering aid. And the texture and properties of NKN-LST textured ceramics have a great influence on the calcination temperature of matrix materials. The optimum electrical properties of NKN-LST ceramics with an orientation degree of 98.9%, a d33 of 442 pC/N, a kp of 0.58, an ε33T of 2935, were calcined at 750 °C, sintered for 1115 °C, 8 h. Therefore, the reduction of calcination temperature induces a significant advancement of 1.5 mol% Na2O excess NKN-LST textured ceramics.Keywords
Funding Information
- Key Project of Natural Science Research of Universities in Anhui Province (KJ2019A089)
- Research Fund for the Program of Talents in University (wzyrc201802)
- University-level Science and Technology Innovation Team Construction (wzykjtd202003)
This publication has 18 references indexed in Scilit:
- Effect of sintering temperature on piezoelectric and dielectric properties of 0.98(Na0.5K0.5)NbO3-0.02Li(Sb0.17Ta0.83)O3+0.01wt%ZnO ceramicsJournal of Electroceramics, 2012
- Influence of A-site non-stoichiometry on structure and electrical properties of K0.5Na0.5NbO3-based lead-free piezoelectric ceramicsScripta Materialia, 2010
- Phase transition characteristics and piezoelectric properties of compositionally optimized alkaline niobate based ceramicsJournal of Alloys and Compounds, 2009
- Fabrication and Characterization of Li2O Excess (Na0.49K0.49Li0.02)(Nb0.8Ta0.2)O3 Piezoelectric CeramicsKey Engineering Materials, 2008
- Compositional Inhomogeneity in Li‐ and Ta‐Modified (K, Na)NbO 3 CeramicsJournal of the American Ceramic Society, 2007
- Piezoelectric properties of (Li, Sb, Ta) modified (Na,K)NbO3 lead-free ceramicsJournal of Applied Physics, 2007
- Effect of Na2O additions on the sinterability and piezoelectric properties of lead-free 95(Na0.5K0.5)NbO3–5LiTaO3 ceramicsJournal of the European Ceramic Society, 2007
- Piezoelectric properties of Li- and Ta-modified (K0.5Na0.5)NbO3 ceramicsApplied Physics Letters, 2005
- (Na0.5K0.5)NbO3–LiTaO3 lead-free piezoelectric ceramicsMaterials Letters, 2005
- Lead-free piezoceramicsNature, 2004