Modeling the Stress-strain State of Linearly Elastic Layered Plates of Non-symmetric Structures
Open Access
- 1 May 2026
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3251 (1)
Abstract
Modeling of the stress-strain state of multilayer plates of arbitrary constant thickness is proposed. The layers of the plate are the same in thickness over the plate area and different in thickness in the transverse direction. The layers of the plate are made of different transversely isotropic materials. The plates have an arbitrary geometric and physical structure in thickness. There is perfect contact between the layers. The horizontal faces of the plate are subjected to static arbitrary transverse loads. There are no tangential forces on them. The boundary conditions on the lateral surface can be arbitrary. The modeling is based on the representation of all components of displacements, deformations, stresses, and boundary conditions on the lateral surface by infinite mathematical series. The series for the displacement components contain terms with multipliers that are combinations of Legendre polynomials within each layer. This significantly differs from other theories in the definition of the stress-strain state. The multipliers in combinations of Legendre polynomials in mathematical series for displacement components are the desired functions of two tangential coordinates. They are found from high-order differential equations and boundary conditions of the corresponding boundary problem. Three-dimensional equations of the theory of elasticity, Reissner’s variational principle and partial sums of series are used. The developed variant of the generalized theory, based on such modeling, allows to accurately satisfy the boundary conditions on the horizontal faces of the plate and the conditions of ideal contact of the layers. By specific mathematical transformations, the system of high-order equations is reduced to the differential equations of Laplace, Poisson, Helmholtz. This method significantly simplifies the solution of boundary problems. The results according to the developed theory were compared with the exact results for two-layer and three-layer hingedly supported plates. The obtained solutions showed high accuracy of the theory. The proposed modeling can be applied to determine the stress-strain state of a wide class of multilayer plates.Keywords
This publication has 23 references indexed in Scilit:
- Application of Adomian‐type method to solve rectangular laminated thick plates in bendingZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2018
- On the use of the first order shear deformation plate theory for the analysis of three‐layer plates with thin soft core layerZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2015
- A new higher order shear deformation theory for sandwich and composite laminated platesComposites Part B: Engineering, 2012
- Development of analytical methods in three-dimensional problems of the statics of anisotropic bodies (Review)International Applied Mechanics, 2000
- The iterative theory of deformation of laminated shellsInternational Applied Mechanics, 1999
- Stress-strain state of non-thin plates and shells. Generalized theory (survey)International Applied Mechanics, 1993
- Derivation of equations for laminate plates and shellsInternational Applied Mechanics, 1978
- Construction of a theory of the bending of plates of moderate thickness by an energoasymptotic methodInternational Applied Mechanics, 1975
- On a Variational Theorem in ElasticityJournal of Mathematics and Physics, 1950
- On the Theory of Bending of Elastic PlatesJournal of Mathematics and Physics, 1944