UV-Femtosecond-Laser Structuring of Cyclic Olefin Copolymer
Open Access
Abstract
We report on the laser ablation of cyclic olefin copolymer using an amplified ultrashort pulsed laser in the ultraviolet spectral range. In addition to a high ablation depth per laser-structured layer up to 74 m at a fluence of 22 J cm, an excellent mean roughness of laser-patterned surfaces down to 0.5 m is demonstrated. Furthermore, with increasing fluence, increasing ablation efficiencies up to mm3 W−1 min−1 are determined. Regarding the quality of the ablation, we observed steep ablation flanks and low debris formation, though for fluences above 10.5 J cm the formation of troughs was observed, being attributed to multiple reflections on the ablation flanks. For comparison, laser ablation was performed under identical conditions with an infrared laser wavelength. The results highlight that UV ablation exhibits significant advantages in terms of ablation efficiency, surface roughness and quality. Moreover, our results show that a larger UV focus spot accelerates the ablation process with comparable quality, paving the way for high-power UV ultrashort pulsed lasers towards an efficient and qualitative tool for the laser machining of cyclic olefin copolymer. The production of complex microfluidics further underlines the suitability of this type of laser.
Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03INT701BD)
This publication has 45 references indexed in Scilit:
- Hot embossing for fabrication of a microfluidic 3D cell culture platformBiomedical Microdevices, 2010
- Surface Properties of Femtosecond Laser Ablated PMMAACS Applied Materials & Interfaces, 2010
- Cyclic olefin polymers: emerging materials for lab-on-a-chip applicationsMicrofluidics and Nanofluidics, 2010
- Analysis and optimization of a micromixer with a modified Tesla structureChemical Engineering Journal, 2010
- Dynamic coating for protein separation in cyclic olefin copolymer microfluidic devicesMicrofluidics and Nanofluidics, 2007
- Study of visible and mid-infrared laser ablation mechanism of PMMA and intraocular lenses: experimental and theoretical resultsLasers in Medical Science, 2007
- Rapid prototyping of microfluidic chips in COCJournal of Micromechanics and Microengineering, 2007
- Effects of Fabrication Process Parameters on the Properties of Cyclic Olefin Copolymer Microfluidic DevicesJournal of Microelectromechanical Systems, 2006
- A microfluidic dye laser fabricated by nanoimprint lithography in a highly transparent and chemically resistant cyclo-olefin copolymer (COC)Journal of Micromechanics and Microengineering, 2004
- Industrialization and application development of cyclo-olefin polymerJournal of Molecular Catalysis A: Chemical, 2004