The Mechanical Properties of Fly-Ash-Stabilized Sands
Open Access
- 8 April 2020
- journal article
- research article
- Published by MDPI AG in Geosciences
- Vol. 10 (4) , 132
Abstract
The stabilization of soil through the addition of fly ash has been shown to be an effective alternative for improving the strength and stiffness of soil through the resulting chemical reactions. The chemical reaction that occurs dissociates the lime (CaO) in the fly ash, and the establishment of cementitious and pozzolanic gels (consisting of calcium silicate hydrate (CSH) gel and calcium aluminate hydrate (CAH) gel) binds the soil particles and increases the strength and stiffness of the soil. Investigations into the mechanical properties of sands stabilized with fly ash (fly-ash-stabilized sands) were conducted through a series of unconfined compressive strength (UCS) and direct shear strength tests for various fly ash percentages, curing times, grain sizes, degrees of saturation during sample preparation, and content of fines. It was found that the mechanical properties—UCS and direct shear strength (DSS)—of fly-ash-stabilized sands increased with both increasing fly ash content in the specimen and curing time, but decreased with increasing grain size, degree of saturation during sample preparation, and content of fines. The results indicated that fly-ash-stabilized sands required more than a month to attain their optimum performance with regard to binding sand particles.Keywords
This publication has 47 references indexed in Scilit:
- Small-strain shear modulus and liquefaction resistance of sand with carbonate precipitationSoil Dynamics and Earthquake Engineering, 2018
- Liquefaction resistance of sand remediated with carbonate precipitation at different degrees of saturation during curingSoils and Foundations, 2017
- Effect of chemical treatment used in MICP on engineering properties of cemented soilsGéotechnique, 2013
- Dynamic properties of microfine cement grouted sandsSoil Dynamics and Earthquake Engineering, 2012
- Experiments and predictions of physical properties of sand cemented by enzymatically-induced carbonate precipitationSoils and Foundations, 2012
- Contributions to “Soils and Foundations”: Ground ImprovementSoils and Foundations, 2010
- Shear modulus and damping ratio of grouted sandSoil Dynamics and Earthquake Engineering, 2004
- Engineering Properties of Grouted SandsJournal of Geotechnical and Geoenvironmental Engineering, 2004
- Behavior of Uncemented Sands and Grouted Sands Before Peak StrengthSoils and Foundations, 2003
- Low Strain Dynamic Properties of Artificially Cemented SandJournal of Geotechnical Engineering, 1986