3D Printing of Anisotropic Piezoresistive Pressure Sensors for Directional Force Perception
Open Access
- 13 March 2024
- journal article
- research article
- Published by Wiley in Advanced Science
- Vol. 11 (24) , e2309607
Abstract
Anisotropic pressure sensors are gaining increasing attention for next‐generation wearable electronics and intelligent infrastructure owing to their sensitivity in identifying different directional forces. 3D printing technologies have unparalleled advantages in the design of anisotropic pressure sensors with customized 3D structures for realizing tunable anisotropy. 3D printing has demonstrated few successes in utilizing piezoelectric nanocomposites for anisotropic recognition. However, 3D‐printed anisotropic piezoresistive pressure sensors (PPSs) remain unexplored despite their convenience in saving the poling process. This study pioneers the development of an aqueous printable ink containing waterborne polyurethane elastomer. An anisotropic PPS featuring tailorable flexibility in macroscopic 3D structures and microscopic pore morphologies is created by adopting direct ink writing 3D printing technology. Consequently, the desired directional force perception is achieved by programming the printing schemes. Notably, the printed PPS demonstrated excellent deformability, with a relative sensitivity of 1.22 (kPa*wt. %)−1 over a substantial pressure range (2.8 to 8.1 kPa), approximately fivefold than that of a state‐of‐the‐art carbon‐based PPS. This study underscores the versatility of 3D printing in customizing highly sensitive anisotropic pressure sensors for advanced sensing applications that are difficult to achieve using conventional measures.Keywords
Funding Information
- National Natural Science Foundation of China (51933007, 52373047)
- Natural Science Foundation of Sichuan Province (2023NSFSC0419)
This publication has 32 references indexed in Scilit:
- Electrohydrodynamic Pulling Consolidated High‐Efficiency 3D Printing to Architect Unusual Self‐Polarized β‐PVDF Arrays for Advanced Piezoelectric SensingSmall, 2022
- Enhanced positive temperature coefficient effect by crosslinking reaction for silicone rubber/carbon black composites with high pressure sensitivityJournal of Applied Polymer Science, 2021
- Deep Eutectic Solvent Induced Porous Conductive Composite for Fully Printed Piezoresistive Pressure SensorAdvanced Materials Technologies, 2021
- Rational Design of Soft Yet Elastic Lamellar Graphene Aerogels via Bidirectional Freezing for Ultrasensitive Pressure and Bending SensorsAdvanced Functional Materials, 2021
- Three‐Dimensional Printed Mechanically Compliant Supercapacitor with Exceptional Areal Capacitance from a Self‐Healable InkAdvanced Functional Materials, 2021
- Functional Fibers and Fabrics for Soft Robotics, Wearables, and Human–Robot InterfaceAdvanced Materials, 2020
- 3D Printing of Ultralight Biomimetic Hierarchical Graphene Materials with Exceptional Stiffness and ResilienceAdvanced Materials, 2019
- Highly Aligned, Anisotropic Carbon Nanofiber Films for Multidirectional Strain Sensors with Exceptional SelectivityAdvanced Functional Materials, 2019
- A Directional Strain Sensor Based on Anisotropic Microhoneycomb Cellulose Nanofiber‐Carbon Nanotube Hybrid Aerogels Prepared by Unidirectional Freeze DryingSmall, 2019
- Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D PrintingAdvanced Functional Materials, 2018