Karman Vortex Creation Using Cylinder for Flutter Energy Harvester Device
Open Access
- 21 July 2017
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 8 (7) , 227
Abstract
This study presents the creation of a Karman vortex for a fluttering electromagnetic energy harvester device using a cylinder. The effects of two parameters, which are the diameter and the position of the cylinder, were investigated on the Karman vortex profile and the amplitude of the fluttering belt, respectively. A simulation was conducted to determine the effect of the creation of the Karman vortex, and an experiment was performed to identify influence of the position of the cylinder on the fluttering belt amplitude. The results demonstrated that vortex-induced vibration occurred at the frequency of the first natural mode for the belt at 3 cm and 10 cm for the diameter and position of the cylinder, respectively. Under such configuration, an electromagnetic energy harvester was attached and vibrated via the fluttering belt inside the turbulent boundary layers. This vibration provides a measured output voltage and can be used in wireless sensors.Keywords
Funding Information
- Universiti Kebangsaan Malaysia (AP-2014-002)
This publication has 27 references indexed in Scilit:
- Systematic parameter study of a nonlinear electromagnetic energy harvester with matched magnetic orientation: Numerical simulation and experimental investigationMechanical Systems and Signal Processing, 2017
- Magnetic-spring based energy harvesting from human motions: Design, modeling and experimentsEnergy Conversion and Management, 2017
- Dual mass system for enhancing energy extraction from Vortex-Induced Vibrations of a circular cylinderInternational Journal of Marine Energy, 2016
- A miniaturized electromagnetic vibration energy harvester using flux-guided magnet stacks for human-body-induced motionSensors and Actuators A: Physical, 2016
- A magnetic-spring-based, low-frequency-vibration energy harvester comprising a dual Halbach arraySmart Materials and Structures, 2016
- Hybrid energy harvester with simultaneous triboelectric and electromagnetic generation from an embedded floating oscillator in a single packageNano Energy, 2016
- Aeroelastic energy harvesting: A reviewInternational Journal of Engineering Science, 2016
- A Novel Tunable Multi-Frequency Hybrid Vibration Energy Harvester Using Piezoelectric and Electromagnetic Conversion MechanismsApplied Sciences, 2016
- Enhancement of the performance of a hybrid nonlinear vibration energy harvester based on piezoelectric and electromagnetic transductionsSmart Materials and Structures, 2014
- Approaches for a Fair Comparison and Benchmarking of Electromagnetic Vibration Energy HarvestersMicromachines, 2013