Sustainable Development of PLA-Based Biocomposites Reinforced with Pineapple Core Powder: Extrusion and 3D Printing for Thermal and Mechanical Performance
Open Access
Abstract
This study developed sustainable biocomposites composed of polylactic acid (PLA) and surface-treated pineapple core powder (PACP), fabricated via extrusion and fused deposition modelling (FDM). PACP loadings of 1–3 vol% were combined after chemical modification with NaOH and silane to improve interfacial bonding. Particle morphology showed increased porosity and surface roughness following treatment. The melt flow index (MFI) increased from 31.56 to 35.59 g/10 min at 2 vol% PACP, showing improved flowability. Differential scanning calorimetry (DSC) showed the emergence of cold crystallization (Tcc ~121 °C) and an increase in crystallinity from 35.7% (neat PLA) to 47.3% (2 vol% PACP). Thermogravimetric analysis showed only slight decreases in T5 and Tmax, showing the thermal stability. The mechanical testing of extruded filaments showed increased modulus (1463 to 1518 MPa) but a decrease in tensile strength and elongation. For the 3D-printed samples, elongation at break increased slightly at 1–2 vol% PACP, likely because of the improvement in interlayer fusion. Though, at 3 vol% PACP, the mechanical properties declined, consistent with filler agglomeration observed in SEM. Overall, 2 vol% PACP offered the optimal balance between printability, crystallinity, and mechanical performance. These results reveal the possibility of PACP as a value-added biowaste filler for eco-friendly PLA composites suitable for extrusion and 3D printing applications.Keywords
This publication has 65 references indexed in Scilit:
- Improving the performance of poly(lactic acid)/ poly(butylene succinate) blends by compatibilization and reinforcement with nanofibrillated cellulosePolymer Engineering & Science, 2025
- Cellulose nanocrystals from agriculture and forestry biomass: synthesis methods, characterization and industrial applicationsEnvironmental Science and Pollution Research, 2024
- Properties of blends of amorphous and semicrystalline PLAs containing multiwalled carbon nanotubesThe Canadian Journal of Chemical Engineering, 2024
- Impact of graphene nanoplatelet size and hybridisation on the properties of natural rubber nanocompositesJournal of Polymer Research, 2024
- Pivotal role of polylactide in carbon emission reduction: A comprehensive reviewEngineering Reports, 2024
- A review on the melt extrusion-based fused deposition modeling (FDM): background, materials, process parameters and military applicationsInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2023
- Sustainable Fiber‐Reinforced Composites: A ReviewAdvanced Sustainable Systems, 2022
- Valorization of pineapple peel waste and sisal fiber: Study of cellulose nanocrystals on polypropylene nanocompositesJournal of Applied Polymer Science, 2020
- Polyester composites of short pineapple fiber and glass fiber: Tensile and impact propertiesPolymer Composites, 2012
- Pineapple leaf fiber reinforced thermoplastic composites: Effects of fiber length and fiber content on their characteristicsJournal of Applied Polymer Science, 2010