Application of dynamic vibration absorbers in designing a vibration isolation track at low-frequency domain
- 9 May 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 231 (5) , 546-557
Abstract
This paper aims to develop a low-frequency vibration isolation track based on passive vibration isolation theory and vehicle–track interaction analysis. First, a preliminary low-frequency vibration isolation track is proposed by attaching multiple dynamic vibration absorbers to a discontinuous floating slab track, and the optimal design parameters of the multidynamic vibration absorber are determined by searching the minimum values of two assessment functions. Further, a three-dimensional coupled dynamic model of a metro vehicle and the low-frequency vibration isolation track is established by using Ansys Parametric Design Language, where the equations of motion of the vehicle subsystem and the wheel–rail contact calculations are incorporated in the software Ansys using the Ansys Parametric Design Language, and the low-frequency vibration isolation track subsystem is directly created by using common elements in Ansys. The vibration isolation performance of the preliminary low-frequency vibration isolation track with multidynamic vibration absorber is investigated under harmonic load and vehicle dynamic load, respectively. Results show that the slab acceleration and supporting force are significantly reduced at low frequencies of 10–20 Hz compared with those of the traditional floating slab tracks. Finally, an improved low-frequency vibration isolation track is developed for actual manufacturing and practical application, and simulations show that the improved low-frequency vibration isolation track exhibits a more robust vibration isolation performance even if optimal design parameters have variations due to manufacturing errors or material deterioration.Keywords
This publication has 21 references indexed in Scilit:
- Prediction and efficient control of vibration mitigation using floating slabs: practical application at Athens metro lines 2 and 3International Journal of Rail Transportation, 2015
- A field investigation into the effect of under sleeper pads on the reduction of railway-induced ground-borne vibrationsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2015
- Railway-induced ground vibrations – a review of vehicle effectsInternational Journal of Rail Transportation, 2014
- An experimental study of train-induced structural and environmental vibrations of a rail transit elevated bridge with ladder tracksProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2010
- The effects of floating slab bending resonances on the vibration isolation of rail viaductApplied Acoustics, 2009
- A tuned damping device for reducing noise from railway trackApplied Acoustics, 2007
- The control of ground-borne vibrations from railway traffic by means of continuous floating slabsJournal of Sound and Vibration, 2006
- Potential low frequency ground vibration (<6.3Hz) impacts from underground LRT operationsJournal of Sound and Vibration, 2003
- RECENT DEVELOPMENTS IN GROUND-BORNE NOISE AND VIBRATION CONTROLJournal of Sound and Vibration, 1996
- Low-Frequency Ground Vibrations from Underground TrainsJournal of Low Frequency Noise, Vibration and Active Control, 1995