Effects of the state of stress on the toughness of polycarbonate
Authors:
- 1 December 1978
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 18 (16) , 1200-1208
Abstract
It is shown that the mechanical properties of polycarbonate are controlled by the state of stress of the test specimen. Whereas the yield stress of the material is relatively insensitive to the state of stress, the tendency of the material to microcavitate is strongly dependent on the residual stresses in the surfaces of a test specimen. The effects of quenching, annealing, post notching, solvent swelling and rate of testing on the modulus of toughness are all related to the state of compression on the free surfaces. The mechanism of deformation is shown by cinematography to consist of the nucleation of a shear band followed by microcavitation along the propagating band. Maximum toughness is obtained by suppressing microcavitation so as to promote shear yielding. When microcavitation occurs, it is the competition between propagating the microcavitation throughout the material and the generation of microcracks in the advancing shear band that controls the ultimate elongation.Keywords
This publication has 14 references indexed in Scilit:
- Residual stresses in polymers and their effect on mechanical behaviorPolymer Engineering & Science, 1976
- The relationship between the physical structure and the mechanical properties of polycarbonateJournal of Polymer Science: Polymer Physics Edition, 1976
- On the structure of glassy polymers. I. Small‐angle X‐ray scattering from polycarbonateJournal of Polymer Science: Polymer Physics Edition, 1975
- Crazing, yielding, and fracture of polymers. I. Ductile brittle transition in polycarbonateJournal of Applied Polymer Science, 1969
- Dynamic mechanical properties of polymersJournal of Applied Polymer Science, 1969
- Electron microscopic investigations on amorphous polycarbonateJournal of Polymer Science Part B: Polymer Letters, 1967
- The effect of thermal pretreatment on the strength of polycarbonateJournal of Applied Polymer Science, 1967
- Mechanism of fracture in glassy polymers. II. Survey of crazing response during crack propagation in several polymersJournal of Polymer Science Part A-2: Polymer Physics, 1966
- Diffusion in glassy polymersJournal of Polymer Science Part C: Polymer Symposia, 1966
- Geometry effects and high speed tensile behavior in styrene polyblend systemsJournal of Applied Polymer Science, 1964