Experimental investigation of the performances of thick CFRP, GFRP, and KFRP composite plates under ballistic impact
Open Access
- 1 January 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Science and Engineering of Composite Materials
- Vol. 31 (1)
Abstract
This study discusses the experimental results of the ballistic impact on thick-layered carbon fibre-reinforced polymer (CFRP), glass-based FRP (GFRP), and Kevlar-based FRP (KFRP) composite plates. Ten 10 mm plates of each type were manufactured via the hand lay-up and vacuum bagging techniques to produce plates with a thickness of 2 mm each, which were bonded together using epoxy adhesive and hot pressed at 75°C to obtain thick layered plates with a total thickness of 20 mm each. The specimen plates were tested according to the NIJ 0108.01 standard in a special firing room using a 9 mm G2 Elite handgun with a full metal jacketed round nose 9 mm × 19 mm Mu1-TJ bullets moving at a velocity of approximately 358 m/s. The results indicated that no total penetration occurred on any of the plates. The bullets were destroyed by impact, and the penetration depths of the CFRP, GFRP, and KFRP plates were 11.10, 9.95, and 22.22%, respectively. The layered structures in these plates appear to have changed the penetration behaviour compared with previous studies. In this study, delamination was the primary failure mode.Keywords
This publication has 15 references indexed in Scilit:
- Numerical study of influence of target thickness and projectile incidence angle on ballistic resistance of the GFRP compositesMaterials Today: Proceedings, 2021
- Comparative study of impact response of GFRP and CFRP composite plates against blunt nosed projectileMaterials Today: Proceedings, 2020
- Numerical and experimental evaluations of a glass-epoxy composite material under high velocity oblique impactsInternational Journal of Impact Engineering, 2020
- An experimental and finite element investigation of the ballistic performance of laminated GFRP composite targetComposites Part B: Engineering, 2017
- Two-scale modeling of high-velocity fragment GFRP penetration for assessment of ballistic limitInternational Journal of Impact Engineering, 2017
- Virtual testing of impact in fiber reinforced laminates2015
- An experimental investigation of the effect of nose shape on fragments penetrating GFRPInternational Journal of Impact Engineering, 2014
- Characterization of high-velocity impact damage in CFRP laminates: Part I – ExperimentComposites Part A: Applied Science and Manufacturing, 2013
- Ballistic impact behaviour of thick composites: Parametric studiesComposite Structures, 2008
- Computational analysis of impact of a bullet against the multilayer fabrics in LS-DYNAInternational Journal of Impact Engineering, 2007