Comparative Study of Coupling Techniques in Lamb Wave Testing of Metallic and Cementitious Plates
Open Access
Abstract
Lamb waves have emerged as a valuable tool to examine long plate-like structures in a faster way compared to conventional bulk wave techniques, which make them attractive in non-destructive testing. However, they present a multimodal and dispersive nature, which hinders signal identification. Oblique incidence is one of the most known methods to generate and receive Lamb waves and it is applied in different experimental arrangements with different types of sensors. In this work, several setups were conducted and compared to determine the optimal ones to launch and detect ultrasonic Lamb waves, especially in non-homogeneous specimens. The chosen arrangements were contact with angle beam transducers, immersion in a water tank, localised water coupling using conical containers and air coupling. Plates of two different materials were used, stainless steel and Portland cement mortar. Theoretical and experimental dispersion curves were compared to verify the existence of Lamb modes and good correspondence was achieved.Keywords
Funding Information
- Spanish Administration (BES-2015-071958, BIA2017-87573-C2)
This publication has 68 references indexed in Scilit:
- Evaluation of Thermal Degradation Induced Material Damage Using Nonlinear Lamb WavesChinese Physics Letters, 2010
- Identification of corrosion damage in submerged structures using fundamental anti-symmetric Lamb wavesSmart Materials and Structures, 2009
- Characterization of ultrasonic Rayleigh surface waves in asphaltic concreteNDT & E International, 2009
- Assessment of porosity of mortar using ultrasonic Rayleigh wavesNDT & E International, 2009
- Guided Wave and Damage Detection in Composite Laminates Using Different Fiber Optic SensorsSensors, 2009
- A comparative study of two non-destructive testing methods to assess near-surface mechanical damage in concrete structuresNDT & E International, 2008
- The transition from Lamb waves to longitudinal waves in platesSmart Materials and Structures, 2008
- Single Mode Extraction from Multiple Modes of Lamb Wave and Its Application to Defect DetectionJSME International Journal Series A, 2003
- Parameter measurement of thin elastic layers using low-frequency multi-mode ultrasonic lamb wavesIEEE Transactions on Instrumentation and Measurement, 2001
- Physically Based Dispersion Curve Feature Analysis in the NDE of CompositesResearch in Nondestructive Evaluation, 1991