Characteristics and internal flow of a low specific speed pump used as a turbine
Authors:
Open Access
- 27 March 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 240 (4) , 042007
Abstract
PAT (Pump as Turbine) has gradually been a popular solution for the small-scale hydropower generation. Because of the rich assortment and the low initial investment. However, PAT is designed as a pump but not a turbine. Therefore, a lot of research was conducted about the performance prediction and the loss distribution of pump and turbine mode. In this paper, we focused on the internal flow and loss mechanisms of the best efficient point of both modes. The characteristic and internal flow were investigated by experimental and computational approaches. The reasons of efficiency reduction in turbine mode and loss mechanisms were clarified by the computational results. The separation flow region occurs on the suction side or pressure side in non-BEP, and the swirling flow counter-rotates the PAT occurring at the outlet in BEP might be the reasons of the efficiency reduction. Moreover, because of the camber line shape of PAT, the separation flow occurs near the inlet could not reattach soon which induces the loss region. Furthermore, the secondary flow near the blade surface and the flow from the pressure side to suction side interfere with each other which induced the loss region.Keywords
This publication has 8 references indexed in Scilit:
- Investigations on pump running in turbine mode: A review of the state-of-the-artRenewable and Sustainable Energy Reviews, 2014
- Theoretical, numerical and experimental prediction of pump as turbine performanceRenewable Energy, 2012
- Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operationExperimental Thermal and Fluid Science, 2008
- Experimental study of characteristic curves of centrifugal pumps working as turbines in different specific speedsExperimental Thermal and Fluid Science, 2008
- Alternate Blade Stall and Rotating Stall in a Vaned DiffuserJSME International Journal Series B, 2002
- Pumps as turbines: an unconventional solution to energy productionUrban Water, 1999
- The Turbine Performance of Centrifugal Pumps: A Comparison of Prediction MethodsProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 1994
- Simple formulae for volumetric efficiency and mechanical efficiency of turbomachinery.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 1990