Sensor array system for real time visualization of magnetostatic fields and imaging of ferrous objects
- 1 November 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
This paper describes a solid-state based multi-element sensor array system capable of real-time imaging of DC magnetic fields and ferrous objects. The final laboratory system comprises 1155 solid state magneto-inductive sensors arrange in a 2D array matrix of 35 × 33 files an columns, equally spaced in order to cover an approximate area of 320 by 300 mm. The sensor array is located within a large current-carrying coil, which may be exited when required to produce a steady magnetic field. This coil is used when required to imaging metallic objects. Data from the sensors array are sampled sequentially by several DSP controlling units and finally streamed to a host computer using USB 2.0 interface; images are generated and displayed at a rate of about 30 frames per minute. Extensive numerical modeling of field distribution patterns using boundary element method has complemented the development of the system. Both numerical simulations and experimental results are shown and discussed. The system was originally intended for deployment in the non-destructive evaluation (NDE) of reinforced concrete, being capable of imaging embedded rebar of different diameters and configurations up to a depth of 100 mm. Nevertheless, the system is also capable of producing real-time images of the magnetic field distribution emitted by either permanent magnets or geometries carrying current.Keywords
This publication has 18 references indexed in Scilit:
- Modeling Studies on the Development of a System for Real-Time Magnetic-Field Imaging of Steel Reinforcing Bars Embedded Within Reinforced ConcreteIEEE Transactions on Instrumentation and Measurement, 2008
- Fast magnetic field mapping of permanent magnets with GMR bridge and Hall-probe sensorsSensors and Actuators A: Physical, 2003
- Two axis magnetic camera based on AMR sensors2003
- Image reconstruction of steel reinforcing bars in concrete using Fourier-domain interpolation applied to a sparsely populated data setNondestructive Testing and Evaluation, 2002
- The methods and devices for scanning of magnetic fieldsJournal of Magnetism and Magnetic Materials, 2002
- A study of the initial magnetisation and demagnetisation behaviour of Nd-Fe-B sintered magnets by a magnetic field mapping system2002
- The experimental verification of the condition of the magnetic material caused by different technological processesJournal of Magnetism and Magnetic Materials, 2000
- The magnetovision method as a tool to investigate the quality of electrical steelMeasurement Science and Technology, 1998
- Modelling of permanent magnets with the boundary element methodEngineering Analysis with Boundary Elements, 1990
- Comparison of different finite element formulations for 3D magnetostatic problemsIEEE Transactions on Magnetics, 1988