Utilization of amino acid for selective leaching of critical metals from spent hydrodesulfurization catalyst
Authors:
Open Access
- 10 October 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 10, 1011518
Abstract
While spent catalysts can cause serious environmental pollution, they can be considered an essential secondary metal source due to their high critical metal grades. The formation of the amino acid-metal complex is often seen in nature, and its potential application in hydrometallurgy can be foreseen. Alanine (Ala) was first screened as the most effective type of amino acid to be used for the selective leaching of spent hydrodesulfurization catalyst (consisting of MoS2 and Co3S4 supported on Al2O3, at 10% Mo and 2.4% Co grades). The sequential 3-step leaching (Step-1: Alkaline Ala leaching at 45°C, Step-2: Hot water leaching at 70°C, Step-3: Second alkaline Ala leaching at 45°C) was conducted where the role of Ala was found to be at least three-fold; 1) maintaining alkalinity by amino acid’s buffering capacity to assist Mo leaching, 2) selectively precipitating Co by forming Co-Ala complex with a distinctive pink color, which can readily re-dissolve in hot water to be separated from spent catalyst particles. 3) Effectively suppressing unwanted dissolution of Al throughout the reaction without needing pH control. Consequently, highly metal-selective, two separate Co-rich (<1% Mo and 79% Co dissolved, Al not detected) and Mo-rich (96% Mo, 19% Co, and 2.1% Al dissolved) leachates were obtained. This study highlighted the potential utility of amino acids as non-toxic, alternative metal lixiviant as well as a metal precipitant for selective leaching of critical metals from spent hydrodesulfurization catalyst.Keywords
Funding Information
- Japan Society for the Promotion of Science
This publication has 32 references indexed in Scilit:
- The role of amino acids in the thiosulphate leaching of goldMinerals Engineering, 2011
- A literature review of the recovery of molybdenum and vanadium from spent hydrodesulphurisation catalystsHydrometallurgy, 2009
- New insight in the behaviour of Co–H2O system at 25–150°C, based on revised Pourbaix diagramsCorrosion Science, 2008
- Hydrothermal reactions of alanine and glycine in sub- and supercritical waterThe Journal of Supercritical Fluids, 2007
- Studies on recycling and utilization of spent catalysts: Preparation of active hydrodemetallization catalyst compositions from spent residue hydroprocessing catalystsApplied Catalysis B: Environment and Energy, 2007
- Selective recovery of molybdenum from spent HDS catalyst using oxidative soda ash leach/carbon adsorption methodJournal of Hazardous Materials, 2006
- pH-Controlled precipitation of cobalt and molybdenum from industrial waste effluents of a cobalt electrodeposition processHydrometallurgy, 2004
- Pressure Oxidative Leaching of Molybdenite in Alkaline MediaShigen-to-Sozai, 2001
- Molybdenum(VI) Peroxo α-Amino Acid Complexes: Synthesis, Spectra, and Properties of MoO(O2)2(α-aa)(H2O) for α-aa = Glycine, Alanine, Proline, Valine, Leucine, Serine, Asparagine, Glutamine, and Glutamic Acid. X-ray Crystal Structures of the Glycine, Alanine, and Proline CompoundsInorganic Chemistry, 1997
- Selective dissolution of critical metals from diesel and naptha spent hydrodesulphurization catalystsResources, Conservation and Recycling, 1995