Combining the Finite Element Analysis and Kriging Model for Study on Laser Surface Hardening Parameters of Pitch Bearing Raceway
Open Access
Abstract
Laser surface hardening is used to improve the fatigue performance of the large diameter pitch bearing. Determination of the process parameters by a trial and error method, depending on the experience of the technician, by changing the parameters repeatedly for each laser surface hardening process is time-consuming and costly. In this paper, a method of analyzing the maximum temperature and depth of a hardened layer during the laser surface hardening process for a pitch bearing raceway of a wind turbine is proposed, which combines finite element simulation and the Kriging model. A three-dimensional finite element model of a pitch bearing ring was established using ABAQUS. The temperature field analysis was performed. The effects of process parameters including laser power, scanning speed, and laser spot radius on the depth of the hardening layer were investigated. Then, taking into account the interactional effects of different process parameters, Kriging models were constructed to reflect the relationship between input process parameters and output responses. The results show that the Kriging approximation model has a small relative error compared with the simulated results and can be used to predict the hardened layer depth.Keywords
This publication has 31 references indexed in Scilit:
- Numerical/experimental analysis of the laser surface hardening with overlapped tracks to design the configuration of the process for Cr-Mo steelsMaterials & Design, 2016
- Effects of size and raceway hardness on the fatigue life of large rolling bearingJournal of Mechanical Science and Technology, 2015
- Fatigue Strength of Laser Hardened 42CrMo4 Steel Considering Effects of Compressive Residual Stresses on Short Crack GrowthProcedia Engineering, 2014
- Rolling Contact Fatigue Life Assessment of Induction Hardened RacewayProcedia Engineering, 2014
- Dynamic characteristic analysis of whole machine tools based on Kriging modelJournal of Central South University, 2013
- Investigation of green properties of iron/jet-milled grey cast iron compacts by response surface methodProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013
- Predictive modeling and experimental results for residual stresses in laser hardening of AISI 4140 steel by a high power diode laserSurface and Coatings Technology, 2009
- Verification of numerical determination of carrying capacity of large rolling bearings with hardened racewayInternational Journal of Fatigue, 2007
- Laser transformation hardening of a tool steel: Simulation-based parameter optimization and experimental resultsSurface and Coatings Technology, 2006
- Thermal analysis of the laser surface transformation hardening processInternational Journal of Heat and Mass Transfer, 2001