The effect of sludge retention time and organic loading rate on performance and membrane fouling in membrane bioreactor
- 9 October 2020
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 96 (3) , 743-754
Abstract
BACKGROUND: Membrane bioreactor (MBR) is commonly considered a promising technology for wastewater treatment due to its outstanding effluent quality, low sludge production, and smaller environmental footprint. However, membrane biofouling is regarded as the bottleneck of MBR processes preventing their universal application. Optimizing operating conditions and improving the antifouling properties of membranes have a substantial impact on the rate and characteristics of membrane fouling in MBR systems.RESULTS: In this study, a two‐step process was performed to mitigate membrane fouling by optimizing sludge retention time (SRT) and organic loading rate (OLR) and improving membrane characteristics in an MBR system developed for the treatment of pharmaceutical wastewater. At first, pure membrane fouling and sludge characteristics were examined in three identical MBRs at different OLRs (40, 100, and 160 mg chemical oxygen demand(COD)/L.d) under various SRTs (7.5, 22.5, and 37.5 days). The investigation indicated that high protein concentration in loosely bound extracellular polymeric substances (LB‐EPS) caused more irreversible fouling at the OLR and SRT of 40 mgCOD/L.d and 7.5 days, respectively. In the second stage, a modified anti‐biofouling membrane was installed into the optimized submerged MBR at OLR = 100 mgCOD/L.d and SRT of 22.5 days for further mitigation of membrane fouling. Membrane fouling significantly reduced as the protein and gram negative bacteria on the surface of the modified membrane decreased.CONCLUSION: The results showed that the reversible and irreversible membrane fouling were controlled successfully through the proposed optimization of operational conditions and by improving the membrane characteristics in MBR. Finally, the protein of LB‐EPS is a vitally important factor affecting the irreversible membrane fouling. © 2020 Society of Chemical Industry (SCI)Keywords
This publication has 59 references indexed in Scilit:
- Effects of solids retention time on the performance and microbial community structures in membrane bioreactors treating synthetic oil refinery wastewaterChemical Engineering Journal, 2018
- Critical review of fouling mitigation strategies in membrane bioreactors treating water and wastewaterBioresource Technology, 2018
- The status of industrial and municipal effluent treatment with membrane bioreactor technologyChemical Engineering Journal, 2016
- Fouling Issues in Membrane Bioreactors (MBRs) for Wastewater Treatment: Major Mechanisms, Prevention and Control StrategiesProcesses, 2014
- A critical review of extracellular polymeric substances (EPSs) in membrane bioreactors: Characteristics, roles in membrane fouling and control strategiesJournal of Membrane Science, 2014
- Recent advances in membrane fouling caused by extracellular polymeric substances: a mini-reviewDesalination and Water Treatment, 2013
- Effects of aeration parameters on effluent quality and membrane fouling in a submerged membrane bioreactor using Box–Behnken response surface methodologyDesalination, 2012
- Influence of organic loading rate on the performance of ultrafiltration and microfiltration membrane bioreactors at high sludge retention timeChemical Engineering Journal, 2012
- An integrated model for physical-biological wastewater organic removal in a submerged membrane bioreactor: Model development and parameter estimationJournal of Membrane Science, 2008
- Correlating TMP Increases with Microbial Characteristics in the Bio-Cake on the Membrane Surface in a Membrane BioreactorEnvironmental Science & Technology, 2008