Unaffectedness of improved wettability on critical heat flux enhancement with TiO2 sputtered surface
Authors:
- 15 February 2016
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 108 (7) , 074101
Abstract
The improvement of surface wettability has been considered as a key factor of nanofluid critical heat flux (CHF) enhancement. However, the authors found that improved wettability did not influence on CHF at all. In this paper, the independent effect of surface wettability on CHF was experimentally investigated. The wettability of surface was controlled by DC plasma sputtering of TiO2 without any formation of porous structure. By controlling sputtering time of TiO2 from 12 s to 600 s, various contact angles were obtained from 62° to 11°. Compared to 82° of the bare surface, wettability was improved for all sputtered surface, but CHF was not changed meaningfully. The CHF data had no meaningful relationship at all with the variation of contact angle, so we concluded that wettability cannot be a main parameter of CHF and its enhancement.Keywords
Funding Information
- Nuclear Safety and Security Commission (1305008-0315-SB130)
This publication has 16 references indexed in Scilit:
- Separate effects of surface roughness, wettability, and porosity on the boiling critical heat fluxApplied Physics Letters, 2013
- Effects of nanofluids containing graphene/graphene-oxide nanosheets on critical heat fluxApplied Physics Letters, 2010
- Effect of nanoparticle deposition on capillary wicking that influences the critical heat flux in nanofluidsApplied Physics Letters, 2007
- Effects of nanoparticle deposition on surface wettability influencing boiling heat transfer in nanofluidsApplied Physics Letters, 2006
- Boiling heat transfer performance and phenomena of Al2O3–water nano-fluids from a plain surface in a poolInternational Journal of Heat and Mass Transfer, 2005
- Effect of nanoparticles on critical heat flux of water in pool boiling heat transferApplied Physics Letters, 2003
- A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and OrientationJournal of Heat Transfer, 2001
- Possible mechanisms of macrolayer formationInternational Communications in Heat and Mass Transfer, 1992
- A new hydrodynamic model of critical heat flux, applicable widely to both pool and forced convection boiling on submerged bodies in saturated liquidsInternational Journal of Heat and Mass Transfer, 1983
- Hydrodynamic Aspects Of Boiling Heat Transfer (Thesis)1959