Forensic Investigation on Cracking in Hanger-to-Girder Connections of Long-Span Suspension Bridges
Authors:
- 1 August 2017
- journal article
- Published by Taylor & Francis in Structural Engineering International
- Vol. 27 (3) , 344-352
Abstract
The hanger-to-girder connection is a vital load-bearing component of suspension bridges. However, two types of premature cracking (types A and B) in hanger-to-girder connections of the Runyang Suspension Bridge have been observed only several years after the bridge was open to traffic. This paper presents the field inspections on the pattern, location and propagation of cracks. To further investigate the mechanism of cracking, a multi-scale finite element (FE) model of the bridge is developed. It is observed from FE analysis results that under vehicle loads, large stress range and significant stress concentration exist. The type A cracks are mainly due to the discontinuity of hanger-to-girder connections and in-plane shear/bending deformation, and out-of-plane bending deformation of the welded connections accelerated type B cracking. To this end, probabilistic FE analyses are performed, and the predicted fatigue lives of the hanger-to-girder connections are obtained and compared with those in the field, where good agreement is observed.Keywords
This publication has 3 references indexed in Scilit: