Challenge of adopting relatively low strength and self-cured geopolymer for road construction application: a review and primary laboratory study
- 3 December 2019
- journal article
- review article
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (11) , 1454-1468
Abstract
In road construction industry, more sustainable construction materials are required. Currently, for modern road pavement rehabilitation and construction, cement is often used as a stabilising agent. With the rapid growth of road traffic and freight, cement usage substantially increases in amount of CO2 emissions. Hence, how a geopolymer, defined as a future sustainable construction material, can be alternatively used in the road pavement. This paper aimed to reveal the possibility of using geopolymers in road construction. A literature review process and a primary laboratory study were performed. The newly developed concept of a relatively low strength (LS-GP) and self-cured geopolymer may be practical when used as a road stabilising agent. The lower strength requirements of a road construction material in comparison to those of normal concrete application could ease any difficulties with geopolymer production. The available technology for geopolymers cured at an ambient temperature condition could enhance such a possibility. Results from the primary laboratory study confirmed such a concept. An applicable level of alkaline solution concentration led to an increase in strength. While, a high calcium content in standard road base material can rapidly react with alkaline activators, such that a self-cured geopolymer could be used.Keywords
This publication has 53 references indexed in Scilit:
- Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperatureJournal of Materials Processing Technology, 2009
- Tungsten mine waste geopolymeric binder: Preliminary hydration products investigationsConstruction and Building Materials, 2009
- Alkali-activated binders: A review. Part 2. About materials and binders manufactureConstruction and Building Materials, 2008
- Geopolymerisation: A review and prospects for the minerals industryMinerals Engineering, 2007
- Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymersColloids and Surfaces A: Physicochemical and Engineering Aspects, 2007
- The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymersColloids and Surfaces A: Physicochemical and Engineering Aspects, 2007
- Heat of hydration of high reactive pozzolans in blended cements: Isothermal conduction calorimetryThermochimica Acta, 2005
- The effect of alkali metals on the formation of geopolymeric gels from alkali-feldsparsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2003
- Fire-resistant geopolymer produced by granulated blast furnace slagMinerals Engineering, 2003
- Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratioMaterials Letters, 2001