Carbon Fiber Recycling Strategies: A Second Stream Waste Used for Thermoplastic Composite Applications
Preprint
- 11 July 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
With a view to sustainable development and circular economy, this work focused on the possibility to valorize a secondary waste stream of recycled carbon fiber (rCF) to produce a 3D printing usable material with PA6,6 polymer matrix. The reinforcing fibers implemented in the present research are the result of a double recovery action: starting with pyrolysis from which long fibers are obtained, used to produce non-woven fabrics and, subsequently, fiber agglomerate wastes obtained from this last process are ground in a ball mill. The effect of a different amount of reinforcement at 5% and 10% by weight on the mechanical properties of 3D printed thermoplastic composites was investigated. Although the recycled fraction was successfully integrated in the production of filaments for 3D printing and therefore in the production of specimens via Fused Deposition Modeling technique, the results showed that fibers did not improve the mechanical properties as expected, due to an unsuitable average size distribution and the presence of a predominant dusty fraction ascribed to the non-optimized ball milling process. PA6,6 + 10 wt.% rCF composites exhibited a tensile strength of 59.53 MPa and a tensile modulus of 2.24 GPa, which correspond to an improvement in mechanical behavior of 21 5 % and 5 21 % compared to the neat PA6,6 specimens, respectively. The printed composite specimens loaded with the lowest content of rCF provided the greatest improvement in strength (+ 9% over the neat sample). Then, a prediction of the “optimum” critical length of carbon fibers was proposed that could be used for future optimizations of the recycled fiber processing.Keywords
All Related Versions
- Version 1, 2023-07-11, Preprints
- Published version: Materials, 16 (15), 5436.
This publication has 35 references indexed in Scilit:
- Facile method to enhance the mechanical interfacial strength between carbon fibers and polyamide 6 using modified silane coupling agentsCarbon Letters, 2022
- A review on carbon fiber-reinforced hierarchical composites: mechanical performance, manufacturing process, structural applications and allied challengesCarbon Letters, 2022
- Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nailsCement and Concrete Research, 2021
- High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional PerformancesJournal of Materials Engineering and Performance, 2021
- Recycling of carbon fiber reinforced composite waste to close their life cycle in a cradle-to-cradle approachCurrent Opinion in Green and Sustainable Chemistry, 2020
- An investigation into 3D printing of fibre reinforced thermoplastic compositesAdditive Manufacturing, 2018
- Life cycle assessment of a steam thermolysis process to recover carbon fibers from carbon fiber-reinforced polymer wasteThe International Journal of Life Cycle Assessment, 2017
- Lignocellulosic fiber breakage in a molten polymer. Part 3. Modeling of the dimensional change of the fibers during compounding by twin screw extrusionComposites Part A: Applied Science and Manufacturing, 2017
- Recovery of carbon fibers from cured and uncured carbon fiber reinforced composites wastes and their use as feedstock for a new composite productionPolymer Composites, 2015
- Thermal and mechanical degradation during polymer extrusion processingPolymer Engineering & Science, 2007