Thermodynamic and exhaust emission studies of CI engine powered by neem oil methyl ester blends doped with nickel oxide nano additives
Authors:
- 16 June 2024
- journal article
- research article
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 43 (5)
Abstract
Assessment of alternate fuel is categorized on thermophysical aspects and performance—emission derived due to its combustion. Data derived from such analysis is short as the energy expenditure to available chemical exergy of fuel is rarely studied. The study of energy derived from fuel energy gives a detailed picture of fuel efficiency and broadens the field of fuel search criteria. The current article aims to find the thermodynamic effects in terms of energy and exergy utilization of neem biodiesel blends and nickel oxide nano additive dosed neem biodiesel blends. Neem biodiesel was transesterified using standard procedures and analyzed using gas chromatography and mass spectroscopy. Later, neem biodiesel was blended with diesel in three volumetric proportions, that is, NB25, NB50, NB75, and pure Neem Oil Methyl ester was investigated as an engine fuel, and later synthesized nickel oxide nano additives of 25 mg/L was added to all the above fuels and further studied for energy, exergy utilization on a TV‐1 VCR engine test rig under varying engine CR. Nickel oxide additives were manufactured using homogenous addition method and were thoroughly studied for formation and presence of constituents using XRD, FE‐SEM, and EDS methods. The usage of nano additives does prove reduction in exergy destruction and entropy generation for NB25 base blend with 25 mg/L NiO leading to a reduction of 8.2% and 9.7% when compared to base blends. Also, the emission found for hydrocarbon, and carbon monoxide for all base fuel blends reduced by an average of 16.8% and 7.35%.Keywords
This publication has 34 references indexed in Scilit:
- Relative exergy and energy analysis of DI‐CI engine fueled with higher blend of Azadirachta indica biofuel with n‐butanol and NiO as fuel additivesEnvironmental Progress & Sustainable Energy, 2023
- TF33 Turbofan engine in every respect: Performance, environmental, and sustainability assessmentEnvironmental Progress & Sustainable Energy, 2020
- Comparitive investigation of performance and emission features of methanol, ethanol, DEE, and nanopartilces as fuel additives in diesel‐biodiesel blendsHeat Transfer, 2020
- The effect of nickel oxide nano‐additives in Azadirachta indica biodiesel‐diesel blend on engine performance and emission characteristics by varying compression ratioEnvironmental Progress & Sustainable Energy, 2020
- Lattice geometry controlled synthesis of Cu – Doped nickel oxide nanoparticlesCeramics International, 2018
- A comparative exergetic performance and emission analysis of pilot diesel dual-fuel engine with biogas, CNG and hydrogen as main fuelsEnergy Conversion and Management, 2017
- Potential for using a tyre pyrolysis oil-biodiesel blend in a diesel engine at different compression ratiosEnergy Conversion and Management, 2015
- Effect of the use of olive–pomace oil biodiesel/diesel fuel blends in a compression ignition engine: Preliminary exergy analysisEnergy Conversion and Management, 2014
- Availability analysis of hydrogen/natural gas blends combustion in internal combustion enginesEnergy, 2008
- Energy-exergy analysis of a diesel engineHeat Recovery Systems and CHP, 1992