Comparative study on the tribological properties of the polyimide composites reinforced with different fibers
Authors:
- 5 April 2015
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 37 (8) , 2541-2548
Abstract
In this study, friction and wear of polyimides reinforced by carbon, glass, aramid, and nano‐alumina fibers were studied and comparatively evaluated against Si3N4 on a ball‐on‐disk test rig under dry rotating and reciprocating sliding, and coefficient of friction and wear rate were considered as responses. The worn surfaces of the composites were examined by scanning electron microscopy to reveal wear mechanisms of the materials' damage. Wear mechanisms are found to be dependent on the test conditions and mechanical properties of the composites itself. It was proven that different reinforcements had different effects on the friction and wear behavior of the polyimide composites to a great extent. The testing condition also had an important role on the tribological properties of the same materials. The best performance was shown by glass fiber‐reinforced polyimide composites owing to their excellent strength and hardness which can share the applied load on the sliding surface. POLYM. COMPOS., 37:2541–2548, 2016. © 2015 Society of Plastics EngineersKeywords
Funding Information
- The Priority Academic Program Development of Jiangsu Higher Education Institutions, The Fundamental Research Funds for the Central Universities (NJ20140025)
- National Natural Science Foundation of China (51403101, 51275242)
- the Major State Basic Research Development Program of China (2015CB057501)
This publication has 25 references indexed in Scilit:
- ESR study of atmospheric pressure plasma jet irradiated aramid fibersSurface and Coatings Technology, 2011
- Tribological properties of MoS2 and carbon fiber reinforced polyimide compositesJournal of Materials Science, 2008
- Differential Water Sorption Studies on Kevlar 49 and As-Polymerized Poly(p-phenylene terephthalamide): Determination of Water Transport PropertiesLangmuir, 2007
- Friction and sliding wear of UHMWPE modified cotton fibre reinforced polyester compositesTribology Letters, 2006
- Future polyimide coatings used in high loaded bearingsIndustrial Lubrication and Tribology, 2005
- Friction and wear of carbon nanohorn-containing polyimide compositesTribology Letters, 2005
- Two-body and three-body abrasive wear behaviour of polyaryletherketone compositesPolymer Testing, 2003
- Tribo performance of polyaryletherketone compositesPolymer Testing, 2002
- Friction and wear behavior of polyetherimide composites in various wear modesWear, 2001
- Preparation and tribological properties of sputtered polyimide filmThin Solid Films, 1995