Development and characterization of solid and porous polylactide‐multiwall carbon nanotube composites
Authors:
- 13 December 2010
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 51 (1) , 43-53
Abstract
This article describes the fabrication of solid and porous polylactide (PLA)‐multiwall carbon nanotube (MWNT) composites prepared using melt blending and subsequent batch processing of porous structures. The morphology and thermal, rheological and electrical properties of the PLA‐MWNT composites prepared with MWNT concentrations of 0, 0.5, 1, 2, and 5 wt% were characterized. The composite structure consisted of identifiable regions of MWNT aggregation and MWNT dispersion. Increasing MWNT content was found to increase the thermal stability and crystallization kinetics of PLA. The addition of MWNT to PLA significantly increased the melt viscosity and electrical conductivity of the composites. Based on rheological and electrical measurements, a continuous MWNT network structure in PLA was found to form when the concentration of MWNT is increased from 0.5 wt% (0.33 vol%) to 1 wt% (0.66 vol%). As many current day applications of polymers and polymer composites require lightweight and low‐density materials, porous PLA‐MWNT composites were fabricated from a batch porous structure processing technique. Porous PLA‐MWNT composites containing 2 and 5 wt% MWNT had lower relative densities, which is attributed to the higher viscosity of the composites suppressing collapse of the porous structure during processing. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics EngineersKeywords
This publication has 25 references indexed in Scilit:
- Carbon‐Nanotube BiofibersAdvanced Materials, 2007
- Preparation of Biodegradable Nanocomposites by Incorporation of Functionalized Carbon NanotubesKey Engineering Materials, 2006
- Nanoscaled Reinforcement of Polystyrene Foams using Carbon NanofibersJournal of Cellular Plastics, 2006
- Photocatalytic Degradation of an Odorous Pollutant: 2-Mercaptobenzothiazole in Aqueous Suspension Using Nd3+−TiO2 CatalystsIndustrial & Engineering Chemistry Research, 2005
- Polyethylene multiwalled carbon nanotube compositesPolymer, 2005
- Novel Carbon Nanotube/Poly(L‐lactic acid) Nanocomposites; Their Modulus, Thermal Stability, and Electrical ConductivityMacromolecular Symposia, 2005
- Rapid and Reproducible Fabrication of Carbon Nanotube AFM Probes by DielectrophoresisNano Letters, 2004
- Big returns from small fibers: A review of polymer/carbon nanotube compositesPolymer Composites, 2004
- Control of Biodegradability of Polylactide via Nanocomposite TechnologyMacromolecular Materials and Engineering, 2003
- Strategies for achieving ultra low‐density polypropylene foamsPolymer Engineering & Science, 2002