Parametric Analysis on Creep Deformation of Deep-Sea PMMA Observation Window
Open Access
- 25 January 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (3) , 1040
Abstract
Observation windows are core components of the submersible manned cabins. The strength and stiffness of the observation window during the loading and load-sustaining process are crucial to ensure the safety of the equipment and personnel inside the manned cabin. It is extremely important to accurately calculate the structural creep performance of the observation window under a long-period sustaining load in seawater. In the present study, finite element analyses based on a temperature-dependent time-hardening creep model are conducted to investigate the performance of the observation window. The mesh convergence is studied first and the parametric analysis is accordingly carried out, taking different combinations of temperatures from 2~30 °C, different loading rates of 2.3 MPa/min, 4.5 MPa/min, 6 MPa/min, and 8 MPa/min, and different friction coefficients of 0.05, 0.1, 0.15, 0.2, 0.25, and 0.3 into account. The results show that the displacement in the y-axis direction of the center point of the lower surface of the viewport window increases with the increasing temperature and loading rate. On the contrary, the axial displacement of the observation window gradually decreases with the increase of the friction coefficient, and the axial displacement is the largest when the lowest friction coefficient is applied. This study aims to offer a more unified analysis and design methodology for the creep deformation of PMMA structures in underwater facilities.Keywords
Funding Information
- National Natural Science Foundation of China (52071203, 2021YFC2800600)
- National Key Research and Development Program of China (52071203, 2021YFC2800600)
This publication has 15 references indexed in Scilit:
- Optimum creep lifetime of Polymethyl Methacrylate (PMMA) tube using rheological creep constitutive models based on experimental dataPolymer Testing, 2019
- Structural analysis of spherical pressure hull viewport for manned submersibles using biological growth methodShips and Offshore Structures, 2018
- Using developed creep constitutive model for optimum design of HDPE pipesPolymer Testing, 2017
- Safety assessment of the acrylic conical frustum viewport structure for a deep-sea manned submersibleShips and Offshore Structures, 2016
- Experimental investigation on dwell-fatigue property of Ti–6Al–4V ELI used in deep-sea manned cabinMaterials Science and Engineering: A, 2015
- Experimental investigation and modeling of non-monotonic creep behavior in polymersInternational Journal of Plasticity, 2011
- Experiment and Simulation Study on the Creep Behavior of PMMA at Different TemperaturesPolymer-Plastics Technology and Engineering, 2010
- Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 10,000 psiJournal of Engineering for Industry, 1972
- Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 5000 psiJournal of Engineering for Industry, 1972
- Conical Acrylic Windows Under Long Term Hydrostatic Pressure of 20,000 PsiJournal of Engineering for Industry, 1970