Electrochemical Assessment of Cu-PIII Treated Titanium Samples for Antimicrobial Surfaces
Authors:
- 3 January 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 706-709, 478-483
Abstract
Titanium implant surfaces should ideally be designed to promote the attachment of target tissue cells. At the same time they should prevent bacterial adhesion, achievable through specific modification strategies. Copper could be well-suited as an antimicrobial finish, since it combines good antimicrobial properties with a certain bio-tolerance with regard to eukaryotic cells. In the present contribution, we evaluate electrochemical results of antimicrobial titanium surfaces generated by the insertion of copper. The surface was prepared via copper implantation into the titanium subsurface by means of plasma-immersion ion implantation (Cu-PIII) until a depth of about 30 nm. The amount and profile of copper ion implantation was changed by variation of the pulse length which was equivalent to the duty cycles of 0.2 % up to 90 %. Specimens containing 3 – 12 % copper (XPS) were used for electrochemical investigations with the help of the mini cell system in 0.9 % NaCl solution. The change in the shape of cyclic voltammograms demonstrated an alteration of the electrochemical behaviour. Copper oxidation peaks appeared in copper-implanted samples and their height was proportional to the copper concentration. These peaks are related to an electrochemical activity and not suppressed by the superficial titanium oxidation.Keywords
This publication has 13 references indexed in Scilit:
- Oxygen and Water Plasma‐Immersion Ion Implantation of Copper into Titanium for Antibacterial Surfaces of Medical ImplantsAdvanced Engineering Materials, 2010
- Gas-Discharge Plasma-Assisted Functionalization of Titanium Implant SurfacesMaterials Science Forum, 2010
- Prevention of pin tract infection with titanium‐copper alloysJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2009
- The effect of positively charged plasma polymerization on initial osteoblastic focal adhesion on titanium surfacesBiomaterials, 2007
- Antibacterial copper-containing titanium nitride films produced by dual magnetron sputteringSurface and Coatings Technology, 2007
- Plasma Methods for the Generation of Chemically Reactive Surfaces for Biomolecule Immobilization and Cell Colonization ‐ A ReviewPlasma Processes and Polymers, 2006
- Electrochemical characterization of titanium biomaterials using the Mini-cell SystemJournal of Materials Science, 2006
- A novel antibacterial titania coating: Metal ion toxicity and in vitro surface colonizationJournal of Materials Science: Materials in Medicine, 2005
- Copper Hypersensitivity: Dermatologie AspectsReviews on Environmental Health, 2003
- Structural aspects of the interface between tissue and titanium implantsThe Journal of Prosthetic Dentistry, 1983