Sc0.2Al0.8N Lamb wave filter with a high temperature stability using the strategy of double-layer SiO2 and groove structure
- 9 June 2025
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Abstract
The Lamb wave filter (LWF) has a moderate bandwidth, and the conventional temperature compensation method with one layer of SiO2 on the Lamb wave resonator (LWR) will significantly reduce its effective electromechanical coupling coefficient. This, in turn, narrows the bandwidth of the LWF and limits its application range. This paper achieves high temperature stability for both the LWR and LWF by employing a strategy that combines a double-layer SiO2 and a groove structure based on a Sc0.2Al0.8N film. Finite element analysis is employed to investigate the effect of adding single or double layers of SiO2 films on the temperature stability of the Sc0.2Al0.8N LWR. The simulation results show that applying SiO2 to both the top and bottom of the Sc0.2Al0.8N film can mitigate the reduction in k2 while enhancing temperature stability. The groove structure in the piezoelectric layer can simultaneously improve the temperature coefficient of frequency (TCF) and k2 by altering the electric field distribution and boundary conditions. Measurement results show that the double-layer SiO2 improves the TCF of the LWR to approximately –10 ppm/°C. The grooves can further improve the TCF toward 0 ppm/°C and increase the k2 of LWR.Keywords
Funding Information
- National Key R&D Program of China (2023YFB3211301)
- Young Scientist Fund of the National Natural Science Foundation of China (62204177)
- Fundamental Research Funds for the Central Universitie (2042023KF0218)
- Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration (EMPI2023025)
- Large-Scale Instrument and Equipment Sharing Foundation of Wuhan University
This publication has 26 references indexed in Scilit:
- 6 GHz lamb wave acoustic filters based on A1-mode lithium niobate thin film resonators with checker-shaped electrodesMicrosystems & Nanoengineering, 2024
- Design and Performance Analysis of a High-temperature Sensor with a Low-temperature Coefficient of FrequencyJournal of Electronic Materials, 2024
- Study on the impact of the resonant cavity and lateral acoustic edge reflector for AlSc0.095N-based S0 mode Lamb-wave resonatorsMicroelectronics Journal, 2024
- Compact and wideband nanoacoustic pass-band filters for future 5G and 6G cellular radiosNature Communications, 2024
- Aluminum scandium nitride thin-film bulk acoustic resonators for 5G wideband applicationsMicrosystems & Nanoengineering, 2022
- Transducer design for AlN Lamb wave resonatorsJournal of Applied Physics, 2017
- Theoretical study of thermally stable SiO2/AlN/SiO2 Lamb wave resonators at high temperaturesJournal of Applied Physics, 2014
- High-Q aluminum nitride Lamb wave resonators with biconvex edgesApplied Physics Letters, 2011
- Temperature-compensated high-stability silicon resonatorsApplied Physics Letters, 2007
- SAW characteristics of AlN films sputtered on silicon substratesUltrasonics, 2004