Highly Monodispersed Tin Oxide/Mesoporous Starbust Carbon Composite as High-Performance Li-Ion Battery Anode
Authors:
- 15 August 2013
- journal article
- letter
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 5 (16) , 7682-7687
Abstract
The widespread commercialization of today’s plug-in hybrid and all electric vehicles will rely on improved lithium batteries with higher energy density, greater power, and durability.To take advantage of the high density of SnO2 anodes for Li ion batteries, we achieved a smart design of monodispersed SnO2/MSCS composite with very high content of SnO2 by a simple infiltration procedure. The synergistic effects of the unique nanoarchitecture of MSCS and the ultrafine size of SnO2 nanoparticle endowed the composite with superior electrochemical performance. Because of the high density of the composite resulting from its monodispersed submicrometer spherical morphology, an exceptionally high reversible lithium storage capacity (both gravimetric and volumetric), very close to the theoretical capacity (1491 mA h/g), can be achieved with good cyclability (capacity retention of 92.5% after 15 cycles). The SnO2/MSCS composite anode exhibited a high reversible average capacity of about 1200 mAh/g over 30 cycles at a current of 80 mAh/g, which corresponds to about 1440 mAh/cm3 (practical volumetric capacity). In addition, a Coulombic efficiency close to 100% was achieved, and less than 25% first irreversible capacity loss was observed.Keywords
This publication has 35 references indexed in Scilit:
- Recent Progress in Advanced Materials for Lithium Ion BatteriesMaterials, 2013
- A Review of Nanostructured Lithium Ion Battery Materials via Low Temperature SynthesisRecent Patents on Nanotechnology, 2013
- Graphene‐Confined Sn Nanosheets with Enhanced Lithium Storage CapabilityAdvanced Materials, 2012
- N‐Doped Graphene‐SnO2 Sandwich Paper for High‐Performance Lithium‐Ion BatteriesAdvanced Functional Materials, 2012
- Tin Oxide with Controlled Morphology and Crystallinity by Atomic Layer Deposition onto Graphene Nanosheets for Enhanced Lithium StorageAdvanced Functional Materials, 2012
- SnO2 nanocrystals deposited on multiwalled carbon nanotubes with superior stability as anode material for Li-ion batteriesJournal of Power Sources, 2011
- Synthesis of Highly Monodispersed Mesoporous Tin Oxide SpheresChemistry of Materials, 2009
- Enhanced Cyclic Performance and Lithium Storage Capacity of SnO2/Graphene Nanoporous Electrodes with Three-Dimensionally Delaminated Flexible StructureNano Letters, 2008
- A Nanostructured Sn–C Composite Lithium Battery Electrode with Unique Stability and High Electrochemical PerformanceAdvanced Materials, 2008
- Anodes for lithium batteries: tin revisitedElectrochemistry Communications, 2003