Nanocrystalline high‐entropy carbide ceramics with improved mechanical properties
- 2 September 2021
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 105 (1) , 606-613
Abstract
The nanocrystalline (Hf 0.25 Zr 0.25 Ta 0.25 Ti 0.25 )C high‐entropy carbide ceramics were successfully prepared through high‐pressure sintering of the self‐synthesized nanopowders for the first time. The results showed that the relative density, grain size, hardness, and elastic modulus of all the as‐prepared samples increased gradually with the increase of sintering temperatures from 1200 to 1600°C. The as‐fabricated samples at 1600°C possessed a relative density of 97.1% and a mean grain size of 98 ± 35 nm and simultaneously exhibited good comprehensive mechanical properties with Vickers hardness of 25.7 ± 0.6 GPa and fracture toughness of 4.3 ± 0.4 MPa·m 1/2 at room temperature due to the grain refinement strengthening mechanism and microcrack deflection and bridging toughening mechanism. In addition, they showed a linear decrease in high‐temperature Vickers hardness with the increase of the temperature from room temperature to 1000°C, which was determined by the combined effects of the intrinsic softening of HEC‐1 ceramics at elevated temperature and the presence of ZrO 2 impurity phase at the grain boundaries.Keywords
Funding Information
- National Natural Science Foundation of China (51972116)
This publication has 34 references indexed in Scilit:
- A new class of high-entropy perovskite oxidesScripta Materialia, 2018
- Excellent mechanical properties of metastable c-WN fabricated at high pressure and high temperatureInternational Journal of Refractory Metals and Hard Materials, 2017
- High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature CeramicsScientific Reports, 2016
- Entropy-stabilized oxidesNature Communications, 2015
- An extended hardness limit in bulk nanoceramicsActa Materialia, 2014
- Sintering and densification of nanocrystalline ceramic oxide powders: a reviewAdvances in Applied Ceramics: Structural, Functional and Bioceramics, 2008
- Temperature dependence of ceramics hardnessCeramics International, 1999
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack MeasurementsJournal of the American Ceramic Society, 1981
- Mechanical Behavior of Polycrystalline Magnesium Oxide at High TemperaturesJournal of the American Ceramic Society, 1966