High-current-density gun with a LaB6 cathode
Authors:
- 1 August 1996
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 67 (8) , 2765-2769
Abstract
To develop a high‐current electron gun for an induction linac, a prototype of a Pierce‐type electron gun using planar 12‐mm‐diam lanthanum hexaboride (LaB6) is studied as a thermionic emitter at high current densities. The cathode is heated up to temperatures of 1750 °C by electron bombardment and thermal radiation from a tungsten heater. The heater that has the highest temperature in the gun is thermally isolated from the outer vacuum chamber with heat shields. The bombardment voltage of ∼1 kV is typically applied to a gap between the cathode and the heater. The gun has been operated up to voltages of 55 kV, obtaining a maximum current density of 20 A/cm2 with a pulse width of 250 ns at a cathode temperature of 1600 °C. High‐voltage pulsing results show that the gun, with applied voltages of over 40 kV, is operated in space‐charge‐limited region at temperatures of over 1600 °C; also it is operated in a temperature‐limited region at temperatures of less than 1500 °C. An effective work function of 2.68 eV is obtained. The cathode, when heated up to 1600 °C, emits over 7 A of electrons with a ∼20% reduction after 850 h of continuous operation. These measurements were made between vacuum pressures of 10−6 and 10−7 Torr.Keywords
This publication has 13 references indexed in Scilit:
- 1.5 MeV ion-channel guided x-band free-electron laser amplifierJournal of Applied Physics, 1995
- Experimental results on the 1.5 MeV ion-channel guided X-band free-electron laserNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 1995
- High current density results from a LaB/sub 6/ thermionic cathode electron gunIEEE Transactions on Plasma Science, 1990
- Lasertron: A Pulsed rf Source Using a Laser-Triggered PhotocathodeJapanese Journal of Applied Physics, 1989
- High-current density, high-brightness electron beams from large-area lanthanum hexaboride cathodesJournal of Applied Physics, 1988
- Large-area lanthanum hexaboride electron emitterReview of Scientific Instruments, 1985
- Directly heated lanthanum hexaboride filamentsReview of Scientific Instruments, 1984
- Work function of sintered lanthanum hexaborideApplied Physics Letters, 1979
- Lanthanum Hexaboride Electron EmitterJournal of Applied Physics, 1972
- Boride CathodesJournal of Applied Physics, 1951