Elastoplastic Dilatant Interface Model for Cyclic Bond-Slip Behavior of Reinforcing Bars
- 1 February 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 142 (2)
Abstract
This paper presents a new interface model to simulate the cyclic bond-slip behavior of steel reinforcing bars embedded in concrete. A multi-surface plasticity formulation is used to model two major inelastic deformation mechanisms occurring in bond slip. One is the crushing and shearing of the concrete between the bar ribs, and the other is the sliding between the concrete and bar surfaces. These two mechanisms are represented by different yield surfaces and nonassociated flow rules. The flow rules account for the shear dilatation of the interface induced by the wedging action of the bar ribs and crushed concrete particles. The interface model has been implemented in a finite element analysis program and has been validated with experimental data. The model is easy to calibrate and is able to reproduce the bond-slip behavior of bars under a wide range of confinement situations, including bar pullout and concrete splitting failures.Keywords
This publication has 14 references indexed in Scilit:
- Consistent tangent formulation for 3D interface modeling of cracking/fracture in quasi-brittle materialsComputer Methods in Applied Mechanics and Engineering, 2008
- Three-Dimensional Modeling of Anchorage Zones in Reinforced ConcreteJournal of Engineering Mechanics, 2001
- Pull-out tests of steel-encased specimens subjected to reversed cyclic loadingMaterials and Structures, 2000
- A model for the bond between concrete and reinforcementMagazine of Concrete Research, 2000
- Validation of a plasticity bond model for steel reinforcementMechanics of Cohesive-frictional Materials, 1999
- Plastic-Damage Model for Cyclic Loading of Concrete StructuresJournal of Engineering Mechanics, 1998
- Development of a plasticity bond model for steel reinforcementMechanics of Cohesive-frictional Materials, 1998
- Normal/Shear Cracking Model: Application to Discrete Crack AnalysisJournal of Engineering Mechanics, 1997
- Interface Model Applied to Fracture of Masonry StructuresJournal of Structural Engineering, 1994
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989