Ultrasonic assessment of wheel—rail contact evolution exposed to artificially induced wear
Authors:
- 3 March 2009
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 223 (4) , 353-364
Abstract
One of the most important effects that wear originates on the wheel—rail system is represented by the significant changes introduced in contact area features and contact pressure distribution. In fact, in most cases, even regular operation gradually modifies the profile of the contacting elements so as to transform the original Hertzian counterformal conditions into a conformal contact characterized by lower average pressures and relevant alterations in the size and shape of the contact patch. On the basis of the aforementioned considerations, this study presents the results of a series of experimental tests carried out with an ultrasonic non-invasive technique, with the final purpose of assessing to what extent wear induces modifications in contact parameters. To this end, in a regular flanged wheel, increasing degrees of wear were artificially produced at the centre of the tread. The interface of the wheel—rail systems thus obtained was investigated with high-frequency ultrasonic waves and the observed coefficient of reflection (which is known to be related to contact conditions) was graphically processed to build contact maps from which to extract information about the size and shape of the contact area and pressure distribution. The results allowed the monitoring of the transition from counterformal to conformal contact, and helped to establish an empirical relationship between the amount of wear and both the contact area value and average pressure. Moreover, contact pressure distribution (obtained with a dedicate calibration procedure) showed that conformal contacts lose the original ‘one-peak’ pressure trend and exhibit a multi-peak configuration. Thus, the ultrasonic method confirmed its capabilities to faithfully monitor contact conditions even in the case of randomly altered geometries of the contacting elements and, in the specific case, may represent an effective tool in validating the wear simulation models.Keywords
This publication has 20 references indexed in Scilit:
- Wheel/rail interface management in heavy haul railway operations—applying science and technologyVehicle System Dynamics, 2007
- A mathematical model to predict railway wheel profile evolution due to wearWear, 2006
- Experimental analysis of contact for the indentation of a flat rounded punchInternational Journal of Solids and Structures, 2006
- A numerical simulation of wheel wearWear, 2005
- The effect of hollow-worn wheels on vehicle stability in straight trackWear, 2005
- The formation of hollow-worn wheels and their effect on wheel/rail interactionWear, 2005
- Evaluation of Nominal Contact Area and Contact Pressure Distribution in a Steel-Steel Interface by Means of Ultrasonic Techniques.JSME International Journal Series C, 2003
- Simulation of mutual wheel/rail wearWear, 2002
- Prediction of wheel profile wear—comparisons with field measurementsWear, 2002
- An utrasonic study of the area of contact between stationary and sliding surfacesProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1971