Solution‐Processed High‐Quality Cu2O Thin Films as Hole Transport Layers for Pushing the Conversion Efficiency Limit of Cu2O/Si Heterojunction Solar Cells
Abstract
Cuprous oxide (Cu2O) is a nontoxic and earth‐abundant semiconductor material, which is a promising candidate for low‐cost photovoltaic applications. Although Cu2O‐based solar cells have been studied for a few decades, they still suffer from disappointing photovoltaic performance due to its high trap‐state density and inferior carrier collection efficiency. Herein, a facile solution method is demonstrated to synthesize high‐quality Cu2O films with low defects as hole transport layers (HTLs) and the Cu2O/Si heterojunction solar cells are fabricated. Moreover, a variety of interfacial engineering and light management strategies are adopted to push the efficiency limit of Cu2O/Si solar cells, including a Ag transparent conductive layer, HNO3 passivation, Mg electrode back contact, and MoOx antireflection layer, which enable the boosting of carrier separation and reduce the loss of incident solar light, yielding a record high power conversion efficiency of 9.54%. This work may pave the way for economical and environment‐friendly use of Cu2O/Si heterojunction solar cells in daily life.Keywords
Funding Information
- National Natural Science Foundation of China (61604061, 51772135)
- Fundamental Research Funds for the Central Universities (21618405, 11619103, 21618311)
- Natural Science Foundation of Guangdong Province (2014A030310302)
This publication has 42 references indexed in Scilit:
- 13.8% Efficiency Hybrid Si/Organic Heterojunction Solar Cells with MoO3 Film as Antireflection and Inversion Induced LayerAdvanced Materials, 2014
- p‐CuO/n‐Si heterojunction solar cells with high open circuit voltage and photocurrent through interfacial engineeringProgress in Photovoltaics: Research and Applications, 2014
- Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 VoltACS Applied Materials & Interfaces, 2013
- Junction studies on electrochemically fabricated p–n Cu2O homojunction solar cells for efficiency enhancementPhysical Chemistry Chemical Physics, 2012
- Sol–gel processed CuOx thin film as an anode interlayer for inverted polymer solar cellsOrganic Electronics, 2010
- Effect of Junction Morphology on the Performance of Polycrystalline Cu2O Homojunction Solar CellsThe Journal of Physical Chemistry Letters, 2010
- Strong Efficiency Improvements in Ultra‐low‐Cost Inorganic Nanowire Solar CellsAdvanced Materials, 2010
- Room‐Temperature Formation of Hollow Cu2O NanoparticlesAdvanced Materials, 2010
- Nanowire-Based All-Oxide Solar CellsJournal of the American Chemical Society, 2009
- Heterojunction solar cell with 2% efficiency based on a Cu2O substrateApplied Physics Letters, 2006