Fabrication of BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3‐δ Skeleton Structure for the Development of High‐Performance Nanocomposite Cathodes for Protonic Ceramic Fuel Cells by Nitrate Impregnation
Open Access
Abstract
A stable and interconnected skeleton structure is critical for the fabrication of high‐performance nanocomposite cathodes by impregnation for protonic ceramic cells (PCCs). This work systematically synthesizes an interconnected BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3‐δ (BZCYYb1711) electrolyte skeleton structure on a dense BZCYYb1711 electrolyte and introduces three catalytic active materials by nitrate impregnation: the electronic conducting La 0.8 Sr 0.2 MnO 3‐δ (LSM), mixed ionic and electronic conducting La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ (LSCF) and triple conducting PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ (PBSCF). The results indicate that skeleton formation and interconnectivity are strongly associated with sintering temperature, most likely governed by the thermodynamics of densification of Ba‐containing electrolyte ceramics. The electrode performance strongly correlates with the activity of the impregnated oxides. The PBSCF impregnated BZCYYb1711 (PBSCF‐1711) electrode exhibits the best performance with a low R p value of 0.06 Ω cm 2 at 700°C in wet air. The fuel cell with PBSCF‐1711 cathode shows a maximum power density of 486 mW cm −2 at 700°C and demonstrates excellent durability, operating stably for over 700 h in fuel cell (FC) mode and through cyclic fuel cell/electrolysis cell operation at 0.5 A cm −2 in H 2 /wet air for 100 h. This study shows the potential for the development of high‐performance air electrodes on a stable and interconnected porous skeleton structure based on nitrate impregnation for PCCs.Keywords
This publication has 63 references indexed in Scilit:
- From Electrolyte and Electrode Materials to Large‐Area Protonic Ceramic Fuel Cells: A ReviewAdvanced Functional Materials, 2024
- Advances in Materials and Interface Understanding in Protonic Ceramic Fuel CellsAdvanced Materials Technologies, 2022
- High-performance proton ceramic fuel cells using a perovskite oxide cathode surface decorated with CoOx nanoparticlesApplied Surface Science, 2022
- Solid-State Electrochemistry and Solid Oxide Fuel Cells: Status and Future ProspectsElectrochemical Energy Reviews, 2022
- Surface Regulating of a Double‐Perovskite Electrode for Protonic Ceramic Fuel Cells to Enhance Oxygen Reduction Activity and Contaminants Poisoning ToleranceAdvanced Energy Materials, 2022
- Thermal Properties and Microstructures Analysis of YSZ and YSZ-Al2O3 Thermal Barrier CoatingsJournal of Thermal Spray Technology, 2020
- Fabrication and evaluation of Sm0.5Sr0.5CoO3−δ impregnated PrBaCo2O5+δ composite cathode for proton conducting SOFCsCeramics International, 2014
- Evaluation of (Ba0.5Sr0.5)0.85Gd0.15Co0.8Fe0.2O3− cathode for intermediate temperature solid oxide fuel cellCeramics International, 2012
- Magnetic and Electrical Properties of LaAMn O3(A= Na, K, Rb, and Sr) with Perovskite-Type StructureJournal of Solid State Chemistry, 1996
- Polarization at Pt electrodes of a fuel cell with a high temperature-type proton conductive solid electrolyteJournal of Applied Electrochemistry, 1985